Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Irving
Gate repair in Irving means working on hardware that is often older than the homeowners calling about it. We service the swing gates in 1960s ranch neighborhoods off Belt Line, the slide gates packed into Las Colinas townhome alleys, and the Irving Gate Motor & Opener systems protecting HOA entries along MacArthur and O’Connor. The written price comes before work starts, every time. You get a photo record of what we found, what we adjusted, and what we replaced before we leave. Call (817) 826-9477 for a technician who will tell you what is actually wrong before anyone picks up a tool.
Why Vance Gate Repair Lewisville Is Irving’s Preferred Gate Repair Company
Most of the Irvine calls we take involve hardware installed before the caller was born. That means the problem is rarely one thing. A gate that drags on the ground is usually three things: a post that heaved in black gumbo soil, a hinge that took the weight for two summers, and an operator that burned out trying to compensate. We name all three. Then we write the price down and hand it to you. No verbal estimates, no invoice at the end that does not match the conversation.
Adrian Vance started this company in 2014 after years of commercial access-control work. That background shows up in Irving more than anywhere else we serve. The Las Colinas gate systems we repair were built for property managers and HOA boards, not individual homeowners. They run on loop detectors, telephone-entry keypads, and slide operators that have not been manufactured in over a decade. We know those systems because we have been documenting them since day one.
Every Irving job gets the same treatment: a background-checked, uniformed technician whose name and photo you receive before arrival. A written scope with flat pricing. A photo log of every adjustment, every reading, every part number. That is the Gate Repair standard we hold in every city, and Irving’s aging gate stock makes it non-negotiable.
Our Gate Repair Services in Irving
Electric Gate Repair
Electric gate repair in Irving usually comes down to one of three failures: a circuit board cooked by 100-degree summers, a misaligned photo-eye that keeps tripping the safety reverse, or a limit switch that was set wrong years ago and has been wearing the motor down ever since. We work on the operator that is already on your property. LiftMaster, DoorKing, Elite, Mighty Mule, FAAC, BFT, Linear, Viking, Ghost Controls. If it runs on electricity, we can diagnose it. The diagnosis is documented. The repair price is written before we start.
Automatic Gate Repair
Automatic gate repair in Irving has a rhythm. HOA communities throughout Las Colinas run slide gates on loop detectors buried in the asphalt. When a loop detector fails, the gate either will not open for residents or will not close for safety. Replacing a loop detector is a saw-cut, a splice, and a re-set, and it is routine work for our crews. In Irving, we also see a lot of telephone-entry keypads from the early 1990s still wired to their original operators. We can source the parts, or we can quote a phased upgrade that the HOA board can actually vote on.
Hinge & Post Repair
Irving sits on black gumbo clay that swells when it rains and cracks when it does not. Gate posts set in concrete footings heave seasonally. That puts stress on hinge welds and tears top hinges off swing gates over time. We reset the post, weld the hinge back to solid steel, and photograph the new alignment. If the post footing needs replacement, we quote it separately and in writing. No one in Irving should pay twice to fix the same hinge.
Gate Realignment
Gate realignment is the most common repair we perform in Irving, and it is almost always a soil problem first and a metal problem second. A slide gate that scrapes its track in a Las Colinas alley was probably installed before the most recent drought cycle. The gate did not warp. The concrete settled. We correct the track, re-level the rollers, and reset the operator limits so the motor is not fighting the gate on every cycle. The fix holds because we address the cause, not just the symptom.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Irving
We service nine gate-automation brands, and in Irving that matters more than in newer suburbs. Original DoorKing and Linear operators from the Las Colinas build-out era still run hundreds of community gates here. We keep discontinued parts sourced through channels most residential companies never built. We also work on LiftMaster, Elite, Mighty Mule, FAAC, BFT, Viking, and Ghost Controls. One company for whatever motor is on the property. That saves HOA boards the cost of ripping out a working operator because a repair company only services one brand.
Common Gate Repair Problems We See in Irving Homes
- Gate post heave from black gumbo soil. North Texas clay expands when wet and contracts when dry. Posts set years ago shift seasonally, which drags gates off their tracks and tears hinge welds. We reset and reinforce footings, then photograph the finished alignment.
- Dead loop detectors on original Las Colinas slide gates. Loop detectors buried in entry asphalt fail with age. The gate stops responding to vehicles. This is a repair, not a replacement job, and HOA boards need that distinction in writing before approving spend.
- Entrapment sensor failures in summer heat. UL 325 requires photo-eyes and contact edges to stop the gate if something crosses the path. Heat and age kill sensors. When they fail, the gate defaults to unsafe behavior. We test every safety input on every visit, not just the symptom.
- Rack and pinion wear on tight alley installations. Irving townhome enclaves with narrow setbacks force slide gates into spaces where swing gates cannot fit. That geometry wears rack teeth unevenly. We realign and replace the rack section, not the whole operator.
Pricing for Gate Repair in Irving, TX
We publish flat price ranges because the number should not be a mystery. In Irving, a gate realignment service call runs $175-$275. Hinge repair or a single post reset typically falls between $300 and $600 depending on footing condition. Electric gate repair, including a new circuit board or limit switch, ranges from $225 to $500 for most residential operators. Slide gate track realignment in a Las Colinas community usually runs $400-$800 when the track and rollers need work but the operator is still sound. Full slide gate operator replacement on a commercial-grade entry runs $1,800-$3,800 depending on the brand and whether the existing rack and safety edges can be reused. Every price is written and handed to you before work starts. Under Clause 1 of our Haven Standard, the number on that page is the number on the invoice. Call (817) 826-9477 for a free estimate.
We Also Serve Cities Near Irving
Our crews reach Gate Repair in Irving fast, and we cover the surrounding metro too. Dallas, Carrollton, Coppell, and Euless all fall within our regular service area. If your gate is in one of those cities, the same written pricing, photo documentation, and 365-Day Done Right Promise apply. We serve Irving as a core city, with dispatch coordinated from our DFW office.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Irving
Yes. Irving’s expansive clay soils swell dramatically after rain and shrink during drought. That seasonal movement heaves posts and footings, causing gate misalignment at a rate we simply do not see in DFW suburbs built on rockier or sandier ground. Our realignment work in Irving is a direct response to that soil cycle. Call (817) 826-9477 for an exact quote, and we will assess your post and footing condition for free.
Dead loop detectors on original 1990s slide gate operators. Las Colinas built out with a wave of commercial-grade DoorKing and Linear systems, and many have never been replaced. When the loop detector in the asphalt fails, the gate stops responding to cars. We replace the detector, not the operator. The HOA saves thousands, and we document the fix for the board’s records. Estimates are free at (817) 826-9477.
Yes. In tight Irving townhome enclaves where the gate is the only way in, we sequence the work so vehicles and pedestrians keep moving. That usually means one side open while we work the other, or a temporary manual release while we restore the track. We have done this in narrow Las Colinas alleys where a swing gate would not fit at all. Call (817) 826-9477 and we will plan the work around your residents’ access.
UL 325 is the safety standard that requires your gate operator to stop and reverse if something, a person, a car, a pet, blocks its path. It is enforced through photo-eyes, contact edges, and the operator’s internal logic. In Irving’s heat, these sensors fail with age, and a gate that keeps closing without reversing is a serious injury risk. We test every safety input on every visit and document the readings. If your gate does not reverse on contact, do not wait. Call (817) 826-9477.
Dallas-Fort Worth hail and ice storms damage slide gates in specific ways. Hail can crack the protective housing on operator circuit boards, letting moisture in. Ice storms pack frozen debris into slide tracks overnight, which bends track sections or overloads the motor at startup. In Irving’s Las Colinas communities, we see a spike in motor capacitor failures and track damage after these events. We stock the common parts so we can get your entry working again quickly. Free estimates: (817) 826-9477.
Call Vance Gate Repair Lewisville in Irving
One important detail about this company: we answer the phone. A live person picks up 24/7, no voicemail loop and no automated attendant. You will get a named technician with a photographed record of everything we do. The price is in writing before any work begins, and our 365-Day Done Right Promise means if it is not right, we make it right. No argument, no fee, no expiration date within that window. That is The Haven Standard, and it applies to every gate we touch in Irving.
Call (817) 826-9477 now for a free estimate on gate repair in Irving, TX.
Written by Adrian Vance, Owner at Vance Gate Repair Lewisville, serving Irving, TX since 2014.