Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Plano, TX
Gate access control in Plano runs into a problem most other cities don’t have: thousands of automated driveway gates and ornamental HOA entrance gates were installed between the late 1970s and early 2000s, and they’re all aging out at the same time. Keypads fail, phone-entry systems drop off the network, and card readers stop reading. When that happens, the gate still swings fine but nobody can get in without walking to the house. Call us at (817) 826-9477 and we’ll send a technician who documents every reading and leaves you a written price before touching the panel.
Why Plano Homes Are Different
Plano’s growth pattern created something specific: block after block of HOA-governed subdivisions where the deed restrictions still govern what a gate can look like. A homeowner in Willow Bend can’t just swap a failed ornamental iron gate for an aluminum panel that doesn’t match the subdivision’s architectural standards. The repair has to satisfy the HOA as well as the homeowner, which means matching materials, colors, and hardware profiles that were often specified 25 years ago and are no longer on a big-box shelf.
The soil adds a second layer. North Texas black cotton clay expands and contracts through every wet-dry cycle, and Plano sits squarely on it. Gate posts heave, tilt, and fall out of plumb over a single season. We routinely find gates in neighborhoods like Hunters Creek and the Chase Oaks corridor dragging on concrete or failing to latch because the post shifted two to four inches, not because the gate itself failed. And every spring, hail dents aluminum and steel panels across the Metroplex, which sends a wave of cosmetic and structural repair calls our way in April and May.
Our Main Plano Services
Plano homeowners call us most often about three things: a gate that won’t swing or slide properly, a gate that needs to be replaced without triggering an HOA violation, and a motor or opener that quit. Here’s what each one involves locally.
Gate Repair in Plano
Most Plano gate repairs fall into two buckets: mechanical problems from shifting clay soil, or electrical problems in the operator and safety sensors. We start by checking the posts and hinges before touching the motor, because in this soil the gate is often perfectly fine and the post has moved. The written price covers the actual fix, not a diagnostic fee that turns into an upsell. Gate Repair in Plano
Gate Installation in Plano
A new gate in Plano means matching the HOA’s deed restrictions before the first hole is dug. We handle the full job: measuring the opening, pulling the old posts when needed, setting new posts deep enough to survive the clay’s movement, and installing the gate so it swings or slides true on day one. You get a written scope and price before the work starts. Gate Installation in Plano
Gate Motor & Opener in Plano
Plano’s original gate openers are now 15 to 25 years old, and many are obsolete. If the motor still has life, we repair it. If it’s beyond economical repair, we quote a replacement that works with the existing gate, not a whole-system swap you don’t need. We service nine automation brands, so the answer is rarely “scrap everything.” Gate Motor & Opener in Plano
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Plano
Gate access control in Plano comes down to one reality: the entry system on a 1990s-era HOA entrance or a custom driveway gate was probably installed when keypads were simple and phone lines were physical. Now the hardware is weathered, the wiring is stiff, and the HOA wants something that works with modern call boxes and mobile access without changing the gate’s appearance. We service the access layer on top of the gate, from keypads and card readers to full Gate Access Control panels, and we photograph the wiring before and after so the next technician doesn’t guess.
Keypad Entry
Signs you need it
Codes work intermittently, the keypad is cracked or sun-faded, or some buttons require three presses to register.
What it costs in Plano
Keypad replacement in Plano typically runs $225-$480 depending on whether we’re matching an existing panel or pulling new wire.
How we do it
We test the existing wiring for voltage drop, match the new keypad to the operator’s input, and photograph the final programming.
Phone Entry
Signs you need it
The call box can’t reach the house line, calls drop when the gate is busy, or the system works on older phone hardware the HOA is replacing.
What it costs in Plano
Phone entry repair and replacement in Plano typically runs $300-$700, depending on whether the existing call box can be re-used.
How we do it
We check the phone-line feed or cellular module, reprogram the directory, and test the release circuit from the call box to the operator.
What Gate Access Control Costs in Plano
| Item | Typical range in Plano |
|---|---|
| Keypad replacement | $225-$480 |
| Phone entry repair/replacement | $300-$700 |
| Card reader replacement | $275-$550 |
Do I need HOA approval for access control changes in Plano?
Usually yes if the gate serves a shared entrance. Check the deed restrictions before ordering anything new; we can match existing hardware so the change is invisible to the HOA’s architectural review.
Can you get my gate working with a mobile app?
In many cases, yes. We can add a cellular or network bridge to compatible operators, but some 1990s boards don’t support it. We’ll tell you before quoting anything.
Gate Parts & Welding in Plano
Gate parts and welding in Plano means fixing what the clay soil and Texas sun have been working on for 25 years. Hinges wear, posts tilt, and ornamental iron panels rust through at the welds. Some of these gates are custom fabrications from the original subdivision build-out, so replacement parts don’t exist. We fabricate, weld, and match the finish in place. This is the Gate Parts & Welding work we do most: make the gate structurally sound again without replacing what doesn’t need replacing.
Hinge Replacement
Signs you need it
The gate sags, drags on the concrete, or shows fresh scrape marks where it didn’t scrape before.
What it costs in Plano
Hinge replacement in Plano typically runs $180-$400 per hinge, depending on gate weight and whether the post needs re-drilling.
How we do it
We unload the gate, remove the worn hinge, inspect the post for cracks, and install a heavier hinge if the original was undersized.
Post Replacement
Signs you need it
The post leans visibly, the gate no longer latches, or the concrete around the post has cracked and lifted.
What it costs in Plano
Post replacement in Plano typically runs $400-$900 per post, including digging out the old footing and setting the new post deep enough for the clay.
How we do it
We pull the old post and footing, set the new post in concrete below the frost line and below the clay’s active zone, and re-hang the gate from scratch.
What Gate Parts & Welding Costs in Plano
| Item | Typical range in Plano |
|---|---|
| Hinge replacement | $180-$400 per hinge |
| Post replacement | $400-$900 per post |
| Custom welding (cracked frame, broken picket) | $150-$450 |
Can you weld an ornamental iron gate without ruining the finish?
We grind to clean metal, weld, then treat and paint the repair to match. It won’t be invisible on a 25-year-old gate, but it will be sound and protected.
My gate post shifted. Do I need to replace the whole gate?
Almost never. The gate itself is usually fine. We reset or replace the post, re-hang the gate, and adjust the latch. That fixes the drag and the latch problem at the source.
Brands We Service in Plano
We work on whatever motor is already on the property rather than steering you toward a replacement. That includes LiftMaster, DoorKing, Elite, and Mighty Mule operators, with common boards and parts kept in local stock for quicker turnaround. For the full list, see our brands.
Pricing for Gate Repair in Plano, TX
| Service | Typical range in Plano |
|---|---|
| Keypad replacement | $225-$480 |
| Phone entry repair/replacement | $300-$700 |
| Card reader replacement | $275-$550 |
| Hinge replacement | $180-$400 per hinge |
| Post replacement | $400-$900 per post |
| Custom welding (cracked frame, broken picket) | $150-$450 |
| Gate roller replacement | $120-$350 per roller |
| Rail repair | $200-$500 |
What pushes a Plano gate bill higher is usually the soil: a post that shifted and needs re-setting adds excavation and concrete work to what started as a hinge job. Hail-damaged panels also run up a quote when the dents are deep enough to require panel replacement rather than straightening. Every price on this page is a range, and the exact figure is written and handed to you before any work starts.
Neighborhoods We Serve in Plano
We work across Plano, from the Legacy corridor and Willow Bend through Hunters Creek, the Chase Oaks corridor, and the older subdivisions east of Central Expressway. Response time for most repair calls in Plano is same day or next morning, depending on the time of year.
- Willow Bend
- Hunters Creek
- Chase Oaks
- Legacy corridor
- East Plano
Service Area - Cities Near Plano
We also serve the surrounding cities when a gate fails and the homeowner doesn’t want to wait. That includes Allen, TX, Carrollton, TX, McKinney, TX, and Prosper, TX. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, and crews serve Plano locally.
Serving Plano, TX - Our Local Coverage Area
We’re based in the Plano area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Plano
Most gate repairs don’t require a permit, but gate replacement that involves new footings or changes to a shared HOA entrance may. We’ll tell you what applies to your specific job before quoting.
We can’t file the HOA application for you, but we can provide spec sheets, colors, and material details to support it. And we match existing hardware so most approvals are straightforward.
Most Plano repair calls get same-day or next-morning service. A live person answers the phone 24/7, so you’ll talk to a human, not a voicemail, at any hour.
If your gate won’t open, won’t latch, or won’t read the keypad anymore, call (817) 826-9477. You’ll get a written price before any work starts, and a photographed record of everything we found and fixed when we leave.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Plano Customers Say
"The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B.