Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Allen
Gate installation in Allen typically runs $1,800 to $6,500 for a standard driveway gate with automation, depending on whether you’re replacing a tired 2000s-era swing operator or building new from the post holes up. We dispatch crews to Allen every day of the week, and a live person answers the phone at (817) 826-9477 around the clock. If you’re in Twin Creeks, Watters Crossing, Stacy Ridge, or anywhere along the Exchange Parkway corridor, we know your gate’s likely failure pattern before we even pull up. That’s not a guess. It’s fifteen years of watching Allen’s clay soil work against builder-grade post footings.
Our Gate Installation team handles everything from a single pedestrian gate to a double driveway swing gate with full automation, and we price every job in writing before any work starts. No verbal ballpark that drifts upward by the time the invoice arrives. You get a number, on paper, first.
Why Vance Gate Repair Lewisville Is Allen’s Preferred Gate Installation Company
Allen homeowners call us because we show up with a plan, not a pitch. Adrian Vance built this company in 2014 on commercial access-control documentation, and that habit carried over into every residential gate we touch. When our crew leaves a job in Allen, you get a photographed record of what was found, what was changed, and what the final settings were. That’s Haven Standard Clause 4, and it means the next technician to open your gate panel won’t be guessing.
We work on nine automation brands, including Viking, Ghost Controls, and DoorKing, so we’re not steering you toward replacing a motor that can be rebuilt. Many companies in the Dallas-Fort Worth metro make their money on replacement packages. We make ours on honesty, which is why we’ll tell you when a $300 post-realignment fixes what a $4,200 full install would have replaced.
Every technician dispatched to Allen is background-checked and uniformed, and you’ll get a name and photo before they arrive. That’s not a luxury add-on. It’s how a gate company should operate when the gate in question is the first thing between your family and the street.
Our Gate Installation Services in Allen
Driveway Gate
Driveway gates in Allen range from simple single-leaf swing gates to automated sliding gates spanning 20 feet or more. Most of the homes we serve in Twin Creeks and Watters Crossing were built in the 1995-2010 window, which means the original operators are pushing 15 to 25 years old and the control boards predate modern safety-edge requirements. We install new driveway gates, replace obsolete operators, and retrofit older gates with current UL 325-compliant sensors and safety edges. A full driveway gate replacement in Allen, including new posts, gate fabrication, and automation, usually lands between $3,200 and $6,500.
Pedestrian Gate
A pedestrian gate is the walk-through gate beside or within your driveway gate, and in Allen’s HOA-governed subdivisions it’s often the most-used access point on the property. These gates fail faster than driveway gates because they’re slammed more often, which means hinges wallow out, latch posts drift off-plumb, and the closer cylinder gives up. We install new pedestrian gates from scratch or replace them as part of a larger driveway gate project. A simple powder-coated steel pedestrian gate in Allen runs $600 to $1,400 installed.
Sliding Gate
Sliding gates are common along Allen’s busier corridors, where a swing gate’s arc would eat too much driveway space. The problem with Allen’s sliding gates is rarely the motor. It’s the track. Allen sits on Blackland Prairie clay that swells in the spring and contracts hard through the summer, which means a gate that slid cleanly in January can start grinding and jerking by July. We handle full sliding gate installation, from cantilever designs that don’t touch the ground to track-guided V-groove systems. Sliding gate installation in Allen typically runs $2,800 to $7,800 depending on gate length and whether you need a new operator or a track rebuild.
Swing Gate
Swing gates are the most common gate style across Allen’s 1990s and 2000s subdivisions, and they fail in predictable ways. Hinge posts heave, rack and pinion gears strip, and the operator binds because the gate hasn’t been plumb since the last dry spell. We install dual-leaf and single-leaf swing gates with operators from Viking, Ghost Controls, and DoorKing among others, and we match the finish to whatever your HOA deed restrictions require. A single swing gate with automation in Allen generally falls between $1,800 and $4,800.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Allen
We service nine major gate-automation brands, so if your existing operator is a Viking, Ghost Controls, or DoorKing unit, we can rebuild it rather than forcing a replacement. We also keep a parts inventory that reflects what Allen’s aging gate stock actually needs: control boards for early-2000s Elite and LiftMaster swing operators, photo-eye replacements for units fried by western sun exposure, and rack-and-pinion gear sets for slide gates that have been chewing themselves up on heaved tracks. If we don’t have the part on the truck, we source it same-day from our Dallas-Fort Worth metro suppliers.
Common Gate Installation Problems We See in Allen Homes
- Post heave from clay soil cycles. Allen’s expansive clay swells in spring and contracts in summer. Gate posts set in shallow footings shift seasonally, throwing hinges out of plumb and making swing operators bind or stall. The motor is often fine. The post is not.
- Builder-grade anchors in caliche-laced soil. Many original Allen gates were set with anchor sleeves that didn’t go deep enough. When caliche layers dry out, the posts move, and slide gates start tearing out rack and pinion gears. We see this constantly in the Exchange Parkway and Bethany Drive corridors.
- Photo-eye and sensor degradation from direct west sun. Gates facing west spend every Texas summer afternoon absorbing 100°F-plus heat. Photo-eye lenses cloud over, loop detector tubing gets brittle, and control boards bake. A gate that opens fine all morning and faults out every afternoon usually has a sun-damaged sensor, not a dead motor.
- Obsolete control boards on 15 to 25-year-old gates. Allen’s original gate operators predate current safety standards. Many control boards can’t support modern photo-eyes, edge sensors, or smartphone access modules. Sometimes retrofit is straightforward. Sometimes the board is so obsolete that a new operator is cheaper than patching the old one.
Pricing for Gate Installation in Allen, TX
Gate installation in Allen covers a range because the job might be a new pedestrian gate or a 24-foot sliding driveway gate with full automation. Here’s what we typically quote:
- Pedestrian gate: $600-$1,400 installed
- Single swing driveway gate with automation: $1,800-$4,800
- Double swing driveway gate with automation: $3,200-$7,500
- Sliding driveway gate with track or cantilever and operator: $2,800-$7,800
- Post re-set and anchor extension on existing gate: $350-$900 per post
- Operator replacement (motor and control board, existing gate): $800-$2,200
Every one of those numbers is a written quote before we pick up a tool. If your gate needs a post re-set instead of a full replacement, we’ll tell you that and charge for the re-set. The price you sign is the price you pay. That’s Haven Standard Clause 1, and it applies to every gate job we do in Allen. Call (817) 826-9477 for a free estimate, and if you already have a written quote from another company, bring it. We’ll review it at no cost.
We Also Serve Cities Near Allen
Our Allen crews work across the northeastern Dallas-Fort Worth metro. If you’re in Plano, McKinney, Prosper, or Carrollton, we dispatch the same background-checked technicians with the same written-price guarantee. The drive time changes. The documentation standard doesn’t.
Serving Allen, TX - Our Local Coverage Area
We’re based in the Allen area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Allen
Your gate post is likely heaving out of plumb as Allen’s Blackland Prairie clay dries and contracts. The operator is fighting a gate that isn’t square, which makes it bind, stall, or strip gears. We fix this by cutting the old footing, sleeving the post deeper into the caliche layer, and re-anchoring it so the gate stays true through the July dry spells. Call (817) 826-9477 for an inspection and a written price.
In most cases, yes. We can add current photo-eyes, edge sensors, and a new control board to an older swing gate provided the operator housing and mounting points are still sound. If the original board won’t communicate with modern safety devices, we’ll tell you the retrofit cost versus the replacement cost and let you choose. Estimates are free.
Yes. Most Allen HOA-governed subdivisions, including Twin Creeks, Watters Crossing, and Stacy Ridge, have deed restrictions specifying gate material, finish, height, and sometimes the brand or type of operator. We match our fabrication and finish specs to what each community’s design guidelines require and can provide documentation for your HOA submission. A gate that violates deed restrictions is an expensive mistake to undo.
It’s usually the track, and specifically the track’s support posts. Allen’s clay soil shifts the gate frame out of alignment with the track, so the rack and pinion start grinding against each other. The motor is just along for the ride. We’ll measure the alignment, assess whether the track needs re-leveling or the posts need re-setting, and give you a written quote before any work starts.
A gate post in Allen’s clay soil should be set at least 36 to 42 inches deep, below the frost line and into stable soil, with the anchor sleeved or cased where caliche is present. Many original Allen gates were set at 24 to 30 inches, which is why they heave. We cut old footings, drill deeper, and set new anchors so the post stays plumb year-round.
Allen’s Older HOA Gates: Retrofit or Replace?
Here’s the part most gate companies won’t tell you. In Allen’s 1990s-2000s HOA subdivisions like Twin Creeks, Watters Crossing, and Stacy Ridge, hundreds of community and driveway gates were installed with builder-grade post footings that weren’t sleeved deep enough for the Blackland Prairie’s caliche-laced clay. Those posts look plumb in winter. They bind gates every July when the clay dries and shifts. So a service call that sounds like an operator failure is often a post-realignment and anchor-extension job, and the honest answer is that the $400 post fix solves what a $4,000 replacement wouldn’t.
On a call in the Stacy Ridge subdivision, our crew found a LiftMaster swing gate binding every afternoon. The hinge post had heaved a full inch out of plumb since winter, throwing the rack and pinion out of alignment. We cut the old post footing, sleeved it deeper into the caliche, reset the post with new anchor bolts, and reinstalled the gate operator. The gate swings smooth through the July dry spells now. That’s the difference between replacing a part and fixing the cause.
For gates along the Exchange Parkway and Bethany Drive corridors, the pattern is different: direct western sun exposure degrades photo-eye lenses, loop detector tubing, and circuit boards in under a decade. A gate that faults out only in the late afternoon usually has a sun-baked sensor, not a failed motor. We replace the sensor, document the setting, and leave you with a photo record of the before and after.
The decision to retrofit or replace comes down to what’s still salvageable. A 20-year-old swing gate with a straight post and a rebuildable Viking operator can be retrofitted with modern safety sensors and a current control board for a fraction of what full replacement costs. A gate whose post footings have heaved repeatedly, stripping gears each time, is often cheaper to replace with a properly set unit than to patch a fourth time. We’ll show you the numbers for both options, in writing, before you decide.
What to Expect When You Call
You’ll reach a live person, day or night. You’ll describe the gate. We’ll schedule a technician for Allen, and you’ll get a name and photo before they show up. They’ll assess the site, document what they find, and hand you a written price. If you approve, work starts. If you don’t, you owe nothing, and you keep the documentation.
Every gate installation we do in Allen carries the 365-Day Done Right Promise. If something isn’t right within a year, we make it right. No argument, no fee, no expiration date within that window. That promise, combined with the written price and the photographed job record, is what separates us from the handshake-and-hope shops.
Call (817) 826-9477 for a free estimate on gate installation in Allen. We’ll put the number in writing before you commit to anything.
Written by the team at Vance Gate Repair Lewisville, serving Allen and the Dallas-Fort Worth metro since 2014 under the leadership of Adrian Vance.