Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Hurst
Gate motor repair and replacement in Hurst typically runs $250 to $680 depending on the operator brand, gate weight, and whether the posts are still plumb. We respond to Hurst calls the same day for urgent failures and usually have a technician at your address within two hours. If your opener is grinding, dead, or opening halfway and reversing, call us at (817) 826-9477 and we’ll diagnose it over the phone before we even dispatch. The price you are quoted on the phone is the price written down before our technician touches a single tool.
We know Hurst gates because we work on them constantly. Older ranch homes, expansive clay, and forty-year-old cedar posts create a repair profile you won’t see in newer DFW suburbs. More on that below, because it changes what actually fixes the problem.
Why Vance Gate Repair Lewisville Is Hurst’s Preferred Gate Motor & Opener Company
Vance Gate Repair was founded in 2014 by Adrian Vance after years of commercial access-control work. That background shows up in how we handle residential Gate Motor & Opener jobs in Hurst: we document everything. Every visit ends with a photo log of what we found, what we adjusted, and what we installed, plus a written record of the part number. No future technician has to guess. No homeowner pays twice to rediscover the same problem.
The 365-Day Done Right Promise covers every gate motor repair we complete in Hurst. If the repair isn’t right within a full year, we come back and make it right at no charge. That’s not a courtesy, it’s Clause 5 of the Haven Standard, the same operating standard Adrian Vance built for commercial clients starting in 2014.
A live person answers our phone 24 hours a day, seven days a week. If your gate motor dies at 6 a.m. on a Tuesday before you leave for work, a human picks up. Not a voicemail tree. Not an answering service that says someone will call you back. You’ll get a named, background-checked technician assigned to your Hurst job, and we’ll send their photo before they arrive.
Gate Motor & Opener Services in Hurst
We focus on the opener itself, not just the gate. Here’s what we handle most often across Hurst.
Motor Installation
A new gate motor in Hurst generally runs $580 to $1,200 installed, including the operator, brackets, safety adjustments, and a documented photo record. For older ranch homes in neighborhoods like Hurst Hills or Bellaire, the older the gate, the more attention we pay to the post and hinge geometry before we mount anything. Installing a motor on a post that’s heaved three inches out of plumb guarantees an early failure and a second invoice. We check the plumb, check the rack alignment, then quote the install. In writing, before any work starts.
Motor Repair
Most gate motor repairs in Hurst fall between $180 and $420. That covers limit-switch resets, capacitor replacements, control-board repair, wiring repairs, and gear adjustments. We’ll tell you on the phone which end of that range you’re likely in. If a motor is worth repairing, we repair it. We don’t steer customers toward replacement because it’s more profitable. Adrian Vance services nine major automation brands, including Viking, Ghost Controls, and DoorKing, so whatever operator is already on your property, we can usually fix it.
Linear Motor
Linear motor openers, the arm-style operators you see on swing gates, are common throughout Hurst’s 1960s and 1970s subdivisions. Typical repair work runs $220 to $500. Installation runs $650 to $1,050. The arm bracket is the weak point on these systems: if the post has shifted even slightly, the bracket binds and the motor begins fighting geometry instead of just cycling the gate. On ranch homes off Precinct Line Road, we regularly find the bracket bent or cracked from exactly that fight.
Slide Motor
Slide motors on Hurst homes almost always fall into two categories: rack-and-pinion systems on long driveway gates and chain-drive units on heavier ranch and acreage gates. Slide motor repair in Hurst typically costs $260 to $600. Installation runs $700 to $1,400 depending on gate length and whether you need a battery backup. Summer heat expands the rack and pinion components. What was aligned in March can be grinding by July. We set slide motors with enough tolerance for a 100-degree day, then photograph the final rack alignment so anyone who services the gate later knows exactly how it was set.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Hurst
We service and install operators from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That’s nine brands. If your Hurst gate has a Viking slide motor that failed or a Ghost Controls arm operator that won’t close, we’re not going to tell you to rip it out and buy something else. We stock common control boards, capacitors, photo-eyes, and limit switches locally, which means most Hurst repairs are completed same day without waiting on a parts delivery. If the part your opener needs isn’t on the shelf, we’ll tell you the honest lead time and hand you a written quote before you commit to anything.
Common Gate Motor & Opener Problems We See in Hurst Homes
- Post heave from Blackland Prairie clay destroys alignment. Hurst sits on expansive clay that shrinks in summer drought and swells in spring rain. Over decades, this cycle walks gate posts out of vertical. A gate that dragged or would not latch before the motor was installed will burn the new motor out just as fast.
- Summer heat expansion binds slide-gate racks. When the thermometer sits over 100°F for days, the metal rack on a slide gate grows. If the gaps were set tight in cooler weather, the gears bind and strip. We set Hurst slide gates with summer expansion in mind, not a cold-weather fit.
- February 2021-style freezes seize unrated operators. Hurst is squarely in the DFW corridor that froze during the 2021 ice storm. Operators not rated for prolonged sub-freezing temperatures seize, and aged wood frames crack. We recommend cold-rated lubricants and battery backups for exposed gates in the older subdivisions east of Precinct Line Road.
- No battery backup means no access when the power fails. Hurst gets thunderstorms and ice storms that knock out power for hours or days. A gate motor without a battery backup is a locked gate until the grid comes back. For homeowners who park inside the gate, that’s not an inconvenience, that’s a problem. We install battery backups on almost every slide and swing opener we put in.
Pricing for Gate Motor & Opener in Hurst, TX
Here are the ranges we quote most often for Hurst work. These include labor, parts, and the documented photo record. Your written price is confirmed before any work starts, and it does not change unless you approve additional work in writing.
| Service | Typical Hurst Range |
|---|---|
| Gate motor diagnostic | $69 (waived with repair) |
| Limit switch / control board repair | $180-$340 |
| Slide motor repair | $260-$600 |
| Linear arm motor repair | $220-$500 |
| Motor installation (single swing) | $580-$1,200 |
| Slide motor installation | $700-$1,400 |
| Battery backup install | $250-$450 |
What moves the price in Hurst? Post condition is the big one. If we’re installing a motor and the post has heaved, the post fix is a separate line item with its own written price. You’ll see it on the quote before anyone starts digging. No surprise at the end. Call (817) 826-9477 for a free written estimate. If another company already gave you a written estimate, bring it, and we’ll review it at no charge. That’s a second opinion, free.
We Also Serve Cities Near Hurst
Our Hurst crews also cover North Richland Hills, Bedford, Colleyville, and Euless. If you live in any of those neighboring communities and need a gate motor inspected, repaired, or replaced, call the same number, (817) 826-9477. You’ll get the same written price, same photo record, same 365-Day Done Right Promise.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Hurst
Because the root problem is almost never the motor. In Hurst, the usual cause is a heavy gate on a heaved post: the Blackland Prairie clay under your driveway has swollen and shrunk for fifty years, tilting the hinge post until the gate drags or binds against the opener. A new motor installed without fixing the post geometry burns out in months. We probe the soil and check post plumb before we quote a motor, not after. If your post is out, the written quote will show you a post re-footing line and a motor line, because that’s the real fix.
Call (817) 826-9477 for a free diagnosis, and we’ll tell you honestly whether the motor is the problem or just the symptom.
Yes. For gates without mains power, we install heavy-duty slide or swing operators paired with solar panels and deep-cycle battery banks. That’s not a hobby-grade setup: we use the same commercial operator logic Adrian Vance used on access-control sites, just sized for a single gate. A typical solar-powered opener for a wide farm gate in the Hurst area runs $1,800 to $3,200 depending on gate width, weight, and whether you need a linear arm or a slide operator. We design the duty cycle around how many times a day the gate actually cycles, so the battery survives a week of overcast weather. And because Hurst gets real ice storms, we recommend cold-rated batteries and a disconnect that lets you manually open the gate if everything freezes.
Call (817) 826-9477 and we’ll come measure the gate, check the travel, and hand you a written quote before anyone starts the install.
We can adjust, but on Hurst’s clay, adjustment is usually a bandage. If the post is out of plumb by two inches or more, the real fix is a new concrete footing driven below the active clay layer, then resetting the post. The clay shrinks in the summer and swells in the spring; it walks the post out of vertical year after year. A footing that ends above the shrink-swell zone just moves with the soil. We dig below it. In Bellaire and Hurst Hills, we see posts that have heaved three to five inches. Adjusting a motor on a post like that is asking a new operator to fight forty years of soil movement. The written quote will show both options: the adjustment price and the re-footing price, and we’ll tell you which one we’d do at our own house.
Call (817) 826-9477 for a free post and motor inspection.
City of Hurst code for automatic gates follows the same general pattern as most Texas municipalities: gates must be equipped with a properly positioned photo-eye or contact edge that reverses the gate if something crosses the path, and operators must have a manual release accessible from outside the property for emergency access. UL 325 compliance is the baseline for any operator we install. Beyond code, the reality of Hurst is that freeze-thaw cycles shift even correctly installed posts, so we recommend a photo-eye and a hard-wired pressure edge on any gate that runs across a driveway. It’s the one safety device that actually keeps working when the gate geometry drifts. We test and adjust both on every motor repair, not just installs.
Call (817) 826-9477 and we’ll inspect your current gate against code and show you, in writing, what’s missing.
In Hurst, the most common cause is thermal expansion. The steel rack on a slide gate grows when it’s over 100°F, and if it was set tight in cooler weather, the gears bind and grind. The second most common cause is a gate roller that’s finally given out after forty years of use. The third is a gearbox low on grease that has been run dry. The fix depends on which one it is: rack alignment takes about an hour and usually runs $180 to $320; a new roller set runs $120 to $250; a dry gearbox usually just needs cleaning and re-greasing, around $110 to $180. We’ll listen to it over the phone, tell you what we think, and confirm with a written price before any work starts.
Call (817) 826-9477 if it’s grinding now, because every day it grinds, it’s wearing the gear teeth down to a much more expensive problem.
Call Vance Gate Repair Lewisville for Gate Motor & Opener Service in Hurst
If your gate motor is dead, grinding, or unreliable, call us at (817) 826-9477. A live person answers, day or night. We’ll ask what the gate is doing, what brand the operator is, and whether the post looks straight. Then we’ll give you a written price range before we dispatch anyone. That written price becomes the exact price before our technician touches a tool. Every Hurst job gets a documented photo record, a written summary of what we fixed, and the 365-Day Done Right Promise. No argument, no fee, no expiration date within that year.
Written by Adrian Vance, Owner at Vance Gate Repair Lewisville, serving Hurst since 2014.
Gate Motor & Opener in Nearby Areas
