Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Flower Mound, TX
Gate access control in Flower Mound means retrofitting keypads, phone entry, and card readers onto ornamental iron gates that were installed when most of this town’s master-planned subdivisions were built. The housing stock tells the story: hundreds of Bridlewood-era homes from 1990-2010 came with builder-standard automatic gates, and those systems are now 15-25 years old. The control boards, keypads, and safety sensors are failing in clusters, and HOA deed restrictions mean every repair has to match the original wrought-iron finish. Call (817) 826-9477 for a written price before any work starts.
Why Flower Mound Homes Are Different
Flower Mound’s explosive growth as one of DFW’s most affluent master-planned suburbs in the 1990s and 2000s produced an unusually dense concentration of residential automatic driveway gates and ornamental iron entry systems in HOA-governed communities. In subdivisions like Bridlewood, the same production builder often installed the same brand and model of swing-gate operator in dozens of adjacent homes at the same time. A technician who gets a service call on one street should carry that operator’s parts in bulk because a cluster of failures on the same street in the same season is the norm, not a coincidence.
North Texas’s expansive shrink-swell clay soils are the second factor. Flower Mound swings from spring saturation to 100°F summer drought, and that cycle heaves and settles gate posts and anchor footings enough to pull hinges out of alignment and bind automatic operators. Add summer heat accelerating UV breakdown of swing-gate operator circuit boards, and you get a repair profile that’s specific to this town: mechanical stress from soil movement, electrical failure from heat, and HOA matching requirements on every visible component.
Our Main Flower Mound Services
The three services Flower Mound homeowners call about most are gate repair, gate installation, and gate motor and opener work, each with its own dedicated page.
Gate Repair in Flower Mound
Gate repair in Flower Mound usually means a gate that’s sagging on hinges pulled out of alignment by clay soil movement, or an operator that’s stopped working because heat and age have taken out the control board. The HOA layer complicates things: any visible replacement part has to match the original wrought-iron finish, style, and color, which means we’re coordinating with the HOA and matching materials on almost every job. The written price is handed over before any work begins, and every visit ends with a photo log of what was found and what was installed. Gate Repair in Flower Mound
Gate Installation in Flower Mound
New gate installation in Flower Mound has to clear two bars: the town’s clay soil, which demands deeper footings than a standard pour, and the HOA’s architectural review, which typically requires the new gate to match the subdivision’s original wrought-iron specification in finish, style, and color. We handle the HOA paperwork as part of the written scope, fabricate or order the gate to match, and set posts below the heave line so the frame doesn’t shift with the seasons. Every installation includes a documented photo record from start to finish. Gate Installation in Flower Mound
Gate Motor & Opener in Flower Mound
Gate motor and opener service in Flower Mound is weighted toward swing-gate operators from a handful of brands that builders installed across entire subdivisions in the mid-2000s. We service Ghost Controls, DoorKing, Elite, and Mighty Mule motors, and we carry parts for the common failure points: limit switches, control boards, and photo-eye sensors. The heat and soil movement in Flower Mound mean we’re checking both the electrical side and the mechanical alignment on every motor call, because one usually causes the other to fail. Gate Motor & Opener in Flower Mound
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Flower Mound
Gate access control in Flower Mound is the retrofit work that brings 15-25 year old builder-grade automatic gates up to modern entry standards: keypads, phone entry, card readers, and video intercoms installed on ornamental iron gates in HOA-governed communities. The age of the housing stock matters here because most of these systems were installed before smartphone-based entry existed, and the original keypads and phone boxes are now failing from heat exposure and wiring degradation. Under The Haven Standard, every access control job starts with a written scope and price, and ends with a documented photo record of what was wired, what was set, and what was installed. This is the work we cover on our Gate Access Control hub page.
Keypad Entry
Signs you need it
The keypad’s buttons have gone soft from Texas sun exposure, or codes that worked last month now do nothing when entered.
What it costs in Flower Mound
Keypad entry replacement in Flower Mound typically runs $180-$340 depending on whether the wiring behind the keypad is intact or needs to be re-run.
How we do it
We remove the old keypad, check the wire run to the operator, install the new unit, set the codes, and photograph the final wiring and settings for the job record.
Phone Entry
Signs you need it
The gate’s phone box won’t dial out, callers can’t hear the homeowner, or the relay that opens the gate has stopped firing.
What it costs in Flower Mound
Phone entry system replacement in Flower Mound typically lands between $450 and $950, depending on whether the cellular module, the relay board, or both need replacing.
How we do it
We test the phone line or cellular connection, identify the failed component, replace it, re-program the entry codes, and leave a written record of the new settings.
What Gate Access Control Costs in Flower Mound
| Item | Typical range in Flower Mound |
|---|---|
| Keypad entry replacement | $180-$340 |
| Phone entry system replacement | $450-$950 |
| Card reader or video intercom retrofit | $600-$1,400 |
Can you match an HOA’s required entry system in Flower Mound?
Yes. We coordinate with the HOA or management company to match the specified hardware, finish, and wiring layout, and we submit the written scope for architectural approval before any work starts. The HOA matching requirement is standard on Flower Mound jobs in this age of housing stock.
Do you service the access control that’s already on my Flower Mound gate?
We service existing keypads, phone entry boxes, card readers, and video intercoms from all nine major brands we work on, including DoorKing, LiftMaster, and Linear. We repair before we recommend replacement. Call (817) 826-9477 for an exact written quote.
Gate Parts & Welding in Flower Mound
Gate parts and welding in Flower Mound means replacing hinges, posts, and rollers on ornamental iron gates that have spent 15-25 years in North Texas clay soil and summer heat. The soil heave cycle pulls hinges out of alignment, the wrought-iron panels sag, and the original hardware from the builder era was never meant to last this long in this climate. Every parts replacement gets a written price before work starts and a photographed record when it’s done, filed under The Haven Standard. The full scope of our parts and fabrication work lives on the Gate Parts & Welding hub page.
Hinge Replacement
Signs you need it
The gate drags on the ground at the latch side, or you can see the hinge pins pulling out of the post at an angle.
What it costs in Flower Mound
Hinge replacement in Flower Mound typically runs $75-$200 per hinge, depending on the size and whether the post needs reinforcement.
How we do it
We support the gate, remove the old hinges, weld or bolt in new ones, realign the gate to the post, and photograph the final position for the job record.
Post Replacement
Signs you need it
The post has visibly leaned or shifted with soil movement, or the concrete footing is cracked and the gate no longer closes flush.
What it costs in Flower Mound
Post replacement in Flower Mound ranges from $150-$350 per post, with deeper footings required in areas with known clay soil movement.
How we do it
We cut out the old post, dig a deeper footing below the heave line, set the new post in concrete, and re-hang the gate to match the original line.
What Gate Parts & Welding Costs in Flower Mound
| Item | Typical range in Flower Mound |
|---|---|
| Hinge replacement | $75-$200 per hinge |
| Post replacement | $150-$350 per post |
| Custom welding repair | $100-$500 depending on the length and complexity of the weld |
Can welding match my gate’s original wrought-iron finish?
Yes. We grind, prime, and finish every weld to match the surrounding iron, then photograph the result against the original section. HOA finish matching is a standard part of the written scope on Flower Mound jobs.
Do you carry parts for my gate brand in Flower Mound?
We stock common parts for the brands most often installed in Flower Mound subdivisions, including DoorKing, Elite, Ghost Controls, and Mighty Mule, and we can source odd sizes the same week. Call (817) 826-9477 for availability and a written price.
Brands We Service in Flower Mound
We work on gates built around Ghost Controls, DoorKing, Elite, and Mighty Mule automation, and we stock the common failure parts locally so a Flower Mound repair doesn’t wait on a freight shipment. Service calls for these brands are covered on our brands page.
Pricing for Gate Repair in Flower Mound, TX
| Service | Typical range in Flower Mound |
|---|---|
| Keypad entry replacement | $180-$340 |
| Phone entry system replacement | $450-$950 |
| Card reader or video intercom retrofit | $600-$1,400 |
| Hinge replacement | $75-$200 per hinge |
| Post replacement | $150-$350 per post |
| Custom welding repair | $100-$500 |
What pushes price up in Flower Mound is the soil: posts that need deeper footings, hinges that need realignment after years of clay heave, and HOA matching requirements that add a finish or fabrication step. The written price you get before work starts is the price you pay, with no surprise invoice at the end.
Neighborhoods We Serve in Flower Mound
We work across Flower Mound’s master-planned subdivisions, where the same builder-era gate hardware shows up block after block. Response time for the Flower Mound area is typically same-day for repair calls and within one business day for quoted installation or access control work.
- Bridlewood
- Wellington
- Chimney Rock
- The Villages of Northshore
- Flower Mound Highlands
Service Area - Cities Near Flower Mound
Our Flower Mound crews also cover the surrounding North Texas communities. If you’re in Southlake, TX, Grapevine, TX, Lewisville, TX, or Coppell, TX, the same written-price policy and documented photo record apply.
Serving Flower Mound, TX - Our Local Coverage Area
We’re based in the Flower Mound area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Flower Mound
Same day for most repair calls in Flower Mound, and a live person answers the phone 24/7 to schedule it. Installation and access control jobs are quoted and scheduled within one business day, never dispatched as rush work.
In most Flower Mound subdivisions, yes, especially for any visible replacement part or new installation. We prepare the written scope and finish details for architectural review and can submit them to your HOA or management company directly.
The written price covers the scope you agreed to before any work starts. If we find something outside that scope, we stop and hand you a written change before doing anything else. You never pay for work you didn’t approve in writing. Call (817) 826-9477 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Flower Mound Customers Say
"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.