Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Colleyville, TX
Gate repair in Colleyville usually means one of two things: a gate access control system that has stopped recognizing keypads, remotes, or intercoms, or structural ironwork and parts that have failed after 25 to 35 years of North Texas clay movement. Most homes here run automated ornamental iron or custom aluminum driveway gates built between the late 1980s and early 2000s, and that aging wave is now failing in predictable, concentrated ways. If your gate will not open, drags against its post, or has a keypad that lights but never releases the latch, call (817) 826-9477 and a live person will answer.
Why Colleyville Homes Are Different
Colleyville is one of the wealthiest cities in Texas, and its housing stock reflects that: large-lot custom and semi-custom estate homes dominate, almost all of them built from the late 1980s through the 2000s, almost all of them with automated ornamental iron or custom aluminum driveway gates rather than the wood or chain-link gates common in denser neighboring cities. That means the gate repair calls here skew heavily toward high-end systems: dual-swing actuators, keypad and intercom integrations, custom fabricated ironwork, and operators from Viking, Elite, DoorKing, and LiftMaster that are now reaching the end of their service life simultaneously.
The single most common structural failure mode in Colleyville is clay heave. North Texas’s expansive Blackland-adjacent soil swells dramatically after heavy rain and shrinks in drought, which causes gate posts to heave, tilt, and shift out of plumb. A gate that binds in late summer after a dry spell is frequently not an operator failure at all; it is a post that has moved and a footing that needs re-set in concrete. Winter ice storms compound the problem, freezing and cracking operator housings and sensor brackets that were specified for milder climates. Technicians who work Colleyville regularly learn to check the post line before touching the motor, because in this city the foundation moves first and the mechanics follow.
Our Main Colleyville Services
Colleyville homeowners call us most often about three things: repairing a gate that has already failed, installing a new gate on a new build or replacement project, and servicing the motor or opener that drives it. Each has its own Colleyville page with full detail.
Gate Repair in Colleyville
Repair work in Colleyville typically involves diagnosing why an automated gate has stopped operating, then fixing the mechanical or structural fault in place rather than replacing the whole system. We see cracked hinge welds, bent slide-track sections, seized rollers, and post alignment problems caused by clay movement far more often than total gate failures. Every repair starts with a written diagnosis and a written price before any work begins, and every completed job leaves with a photo record of what was found and what was changed. Gate Repair in Colleyville covers the full scope of this work.
Gate Installation in Colleyville
New gate installation here means working with the reality of Colleyville’s lots: long driveway runs, ornamental iron aesthetics, and HOA design standards that often specify materials, heights, and automation details. We measure the opening, check the grade and soil condition, and set posts in concrete sized for expansive clay before the gate ever hangs. The written quote includes the exact gate, hardware, operator, and concrete work so there is no surprise invoice. Gate Installation in Colleyville has the full breakdown of what a new project involves.
Gate Motor & Opener in Colleyville
Operator failure in Colleyville often traces back to the same 25-35 year wave of original installations, but it can also be caused by the soil: a shifting post throws a swing actuator out of alignment, which burns out limit switches and strips gears. We service nine automation brands, including LiftMaster, DoorKing, Elite, and Viking, so the repair follows the motor that is already on the property rather than steering toward a replacement. Gate Motor & Opener in Colleyville explains the diagnostic and repair process in detail.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Colleyville
Gate access control in Colleyville means the electronics and entry hardware that decide who gets through: keypads, remotes, phone entry, card readers, and video intercoms mounted on automated iron gates. Homes built in the late 1980s through early 2000s are now seeing those original systems fail, and because Colleyville properties are large and set back from the street, the access system is usually the only way a visitor or delivery driver can announce themselves. We repair and replace the full range of access control equipment, including systems from DoorKing, Elite, LiftMaster, and Viking. Gate Access Control is our full service hub for this work.
Keypad Entry
Signs you need it
The keypad lights up but does not release the gate, or it works intermittently after rain.
What it costs in Colleyville
Keypad replacement in Colleyville typically runs $275-$525, depending on whether the wiring is still sound.
How we do it
We test the circuit, replace the keypad or the wiring run, reprogram codes, and photograph the finished setting.
Video Intercom
Signs you need it
The video feed is dead, the call button does not ring the house, or the screen freezes during a call.
What it costs in Colleyville
Video intercom replacement in Colleyville typically costs $650-$1,450, depending on wiring condition and system brand.
How we do it
We check the cable run and power supply first, then replace the outdoor station or indoor monitor and verify the call path.
What Gate Access Control Costs in Colleyville
| Item | Typical range in Colleyville |
|---|---|
| Keypad replacement | $275-$525 |
| Video intercom replacement | $650-$1,450 |
| Access control wiring repair | $150-$400 |
Can you fix a keypad the same day in Colleyville?
Yes. Most keypad failures are diagnosed and repaired the same day, because the fault is usually a failed keypad, a broken wire, or a control board input. Call (817) 826-9477 for a written price before any work starts.
Do you service existing DoorKing or Elite access systems?
We do. Our technicians work on DoorKing, Elite, LiftMaster, and Viking systems already installed on Colleyville properties, and we match the replacement part to the existing control board. The written quote covers parts and labor with no surprise invoice.
Gate Parts & Welding in Colleyville
Gate parts and welding in Colleyville address the structural failures that come with 25 to 35 year old ironwork and the city’s expansive clay soil. Hinges crack, posts heave out of plumb, slide rails bend, and rollers wear flat. Where the mechanical operator gets blamed, the actual fault is often a welded joint or a footing that has moved. Gate Parts & Welding is our hub for structural repair and replacement.
Hinge Replacement
Signs you need it
The gate sags, scrapes the ground at the latch side, or the hinge pin shows visible wear or cracking.
What it costs in Colleyville
Hinge replacement in Colleyville typically runs $180-$420, depending on gate weight and whether welding is required.
How we do it
We measure the gate weight, cut or unbolt the old hinge, weld or bolt the new assembly in place, and photograph the finished alignment.
Post Replacement
Signs you need it
The post leans visibly, the gate binds against the latch, or the concrete footing shows cracks after dry weather.
What it costs in Colleyville
Post replacement in Colleyville typically costs $550-$1,200, including concrete removal and a new footing sized for expansive soil.
How we do it
We remove the old post and footing, dig a deeper hole, set a new post in concrete, and let it cure before re-hanging the gate.
What Gate Parts & Welding Costs in Colleyville
| Item | Typical range in Colleyville |
|---|---|
| Hinge replacement | $180-$420 |
| Post replacement | $550-$1,200 |
| On-site welding repair | $120-$350 |
Can you weld a cracked ornamental iron gate in place?
Yes. We can weld most cracks without removing the gate, including hinge mounts, picket joints, and top-rail separations. The price is written before the welder starts.
Do you replace gate posts that have shifted from clay soil?
We do. Post replacement in Colleyville includes removing the old concrete footing and setting a new post deeper, which is the only lasting fix for clay heave. Call (817) 826-9477 for a free estimate.
Brands We Service in Colleyville
We stock parts locally for DoorKing, Elite, LiftMaster, and Mighty Mule systems, and our technicians carry common keypads, sensors, and control boards for same-day repairs on most Colleyville gates. Our brands page lists the full range of automation systems we service.
Pricing for Gate Repair in Colleyville, TX
| Service | Typical range in Colleyville |
|---|---|
| Keypad replacement | $275-$525 |
| Video intercom replacement | $650-$1,450 |
| Access control wiring repair | $150-$400 |
| Hinge replacement | $180-$420 |
| Post replacement | $550-$1,200 |
| On-site welding repair | $120-$350 |
| Gate roller replacement | $90-$280 |
| Slide rail repair | $180-$500 |
| Remote control replacement | $60-$180 |
| Card reader replacement | $300-$600 |
What pushes a Colleyville gate repair higher is usually the soil: a post that has shifted means concrete work, and a gate that has dragged for months means extra hinge and roller wear. The written price you receive before any work starts is the full price; nothing is added after the fact.
Neighborhoods We Serve in Colleyville
We serve every Colleyville neighborhood, and most gate repair calls in the city are reached within the hour. Our technicians regularly work in:
- Montclair
- Woodbriar
- Wimbledon Estates
- La Vina
- Highland Meadows
Service Area - Cities Near Colleyville
We also serve the surrounding area, including Bedford, TX, Euless, TX, Southlake, TX, and Hurst, TX. Dispatch is coordinated from our Dallas-Fort Worth office, with crews serving Colleyville locally every day.
Serving Colleyville, TX - Our Local Coverage Area
We’re based in the Colleyville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Colleyville
Most Colleyville gate repair calls are reached within the hour. A live person answers the phone 24/7 at (817) 826-9477, and you will know the technician’s name and a firm arrival window before they head your way.
Many Colleyville HOAs have design standards that cover gate style, height, materials, and automation. Repairs that match the existing gate usually do not need approval, while replacements can. We provide the written documentation HOAs typically request, including parts photos and a scope of work.
The written price you receive before any work begins is the full price for the described scope. If we find something unexpected during the repair, we stop, show you what we found, and get your approval in writing before continuing. There is no surprise invoice at the end.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Colleyville Customers Say
"Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N.