Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Southlake, TX
Gate access control in Southlake means keeping a custom estate gate working without disturbing the original look. Most of these homes went up between 1990 and 2015, which means the first-generation keypads, phone entry boards, and swing operators are all failing in the same five-year window. When a keypad stops reading codes on a Timarron estate, the homeowner needs a repair that doesn’t leave a visible patch on the ornamental iron. Call us at (817) 826-9477 and we’ll give you a written price before any work begins.
Why Southlake Homes Are Different
Southlake carries one of the densest inventories of high-end ornamental iron automated driveway gates in the entire DFW Metroplex. The vast majority of these custom estates were built during the 1990s and 2000s boom, and their original gate equipment is now 15 to 25 years old. That is exactly when control boards, keypads, and hydraulic operators start failing, and it is happening across the city at once.
There is a second pressure most cities don’t have. HOA covenants in communities like Timarron strictly govern what a gate can look like. A repair has to restore the original aesthetic, not substitute generic hardware. That means skilled ornamental iron welding is part of almost every access control job here. You cannot swap a hinge or mount a new keypad pedestal without matching the finish and the profile of the original ironwork.
The clay soil adds one more variable. Tarrant County’s expansive clay heaves and settles with the seasons, throwing gate posts out of alignment and stressing welds. What begins as a keypad fault is often found, on inspection, to be a gate that no longer closes squarely enough for the safety loop to read properly.
Our Main Southlake Services
These are the three jobs Southlake homeowners call us about most often. Each has its own page with full pricing and local detail.
Gate Repair in Southlake
Repair work here usually starts with a gate that won’t open, won’t close, or grinds against the post. On Southlake estates the cause is often a mix of age and clay-soil shift: a hinge weld that has hairline-cracked after years of heaving, or a limit switch thrown out by a post that settled two degrees. We document what we find and photograph the correction. For the full repair breakdown, see Gate Repair in Southlake.
Gate Installation in Southlake
New installations in Southlake nearly always have to match what the HOA expects. Homeowners in Timarron and Shady Oaks replace a failing gate with one that reads as original, often a custom ornamental iron swing panel with a modern operator concealed behind it. We measure, quote in writing, and order to spec. Details are on Gate Installation in Southlake.
Gate Motor & Opener in Southlake
Many original Southlake operators were GTO/Pro-SW or early Elite units from the late 1990s. Those boards are discontinued or nearly impossible to source. The practical fix is typically retrofitting a modern LiftMaster or DoorKing operator onto the existing iron panel without changing its face. We stock parts for all nine brands we service. See Gate Motor & Opener in Southlake.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Southlake
Gate access control in Southlake is the electronics and credentials that tell the operator when to open: keypads, remotes, phone entry, card readers, and video intercoms. Because the city’s estate gates are 15 to 25 years old, these boards fail in clusters, and because the panels are HOA-governed ornamental iron, every repair has to leave the visual appearance untouched. We service all nine major automation brands and document every setting we change. For a broader look at systems and hardware, see Gate Access Control.
Keypad Entry
Signs you need it
Codes stop working, the keypad lights but won’t trigger the operator, or the faceplate has cracked from sun exposure.
What it costs in Southlake
Keypad entry repair in Southlake runs $160 to $420 including parts and the service call.
How we do it
We test voltage at the keypad, check the wiring run to the operator, replace or reprogram the unit, and re-secure the mount to match the original finish.
Phone Entry
Signs you need it
The call box won’t dial out, visitors hear dead air, or the gate can’t be opened from the house phone.
What it costs in Southlake
Phone entry repair in Southlake runs $200 to $550 depending on whether the board is repairable or requires replacement.
How we do it
We trace the phone line or cellular module, test the relay that fires the operator, and either rebuild the board or install a compatible replacement inside the existing housing.
Video Intercom
Signs you need it
The screen shows no image, audio cuts out, or the call button no longer rings the house station.
What it costs in Southlake
Video intercom repair in Southlake runs $250 to $600, more if the monitor must be replaced.
How we do it
We check power and signal at the outdoor station, test the indoor monitor, and replace wiring, camera modules, or the monitor itself without altering the gate’s face.
What Gate Access Control Costs in Southlake
| Item | Typical range in Southlake |
|---|---|
| Keypad entry repair | $160 - $420 |
| Phone entry repair | $200 - $550 |
| Video intercom repair | $250 - $600 |
Can you repair a 20-year-old phone entry system in Southlake?
Yes, most of the time. We rebuild or match boards for systems from the 1990s and early 2000s. Where a board is too far gone, we fit a modern equivalent into the existing housing. Call (817) 826-9477 for a written quote.
Does Southlake HOA approval matter for access control work?
Yes. Many Southlake HOAs require the visible hardware to match original finishes. We work to that standard: same panel, same faceplate profile, new internals. Estimates are free and written before work starts.
Gate Parts & Welding in Southlake
Gate parts and welding in Southlake is the structural side of the trade: hinges, posts, rails, rollers, and the custom ironwork that keeps an estate gate square and safe. The expansive clay soil in this part of Tarrant County heaves and settles every season, and on a 20-year-old gate that means hinge welds crack and posts drift. Because so many Southlake gates are HOA-governed ornamental iron, the welding often has to be invisible. For component-level detail, see Gate Parts & Welding.
Hinge Replacement
Signs you need it
The gate sags, scrapes the ground, or the hinge pin shows visible wear or a hairline crack.
What it costs in Southlake
Hinge replacement in Southlake runs $120 to $380 per hinge including the weld and finish work.
How we do it
We support the gate, cut out the old hinge, weld in the replacement, and grind and paint the joint to match the original finish.
Post Replacement
Signs you need it
The post leans, the gate no longer lines up with the latch, or the concrete footing has heaved visibly.
What it costs in Southlake
Post replacement in Southlake runs $350 to $900 per post depending on footing depth and access.
How we do it
We excavate the old footing, set a new post in concrete sized for the clay soil, and re-hang the gate to close squarely with the operator.
Custom Welding
Signs you need it
A decorative scroll has cracked, a rail has separated, or you need a modification the HOA insists match the original profile.
What it costs in Southlake
Custom welding in Southlake runs $150 to $500 per repair point depending on the complexity of the profile.
How we do it
We weld the repair point, grind it smooth, and apply a finish matched to the existing iron so the work is not visible from the street.
What Gate Parts & Welding Costs in Southlake
| Item | Typical range in Southlake |
|---|---|
| Hinge replacement | $120 - $380 per hinge |
| Post replacement | $350 - $900 per post |
| Custom welding | $150 - $500 per point |
Can you weld a Southlake gate without the HOA noticing the repair?
That is the standard we work to. We match the profile, the weld is ground smooth, and the finish is blended to the existing iron. A neighbor should not be able to tell where the repair was made. Call for a written estimate.
How urgent is a cracked hinge weld on a heavy Southlake gate?
Treat it as urgent. A heavy ornamental gate puts enormous load on the hinge, and a full failure can drop the gate on a car or a person. Call (817) 826-9477 and we’ll dispatch a technician.
Brands We Service in Southlake
We service nine major gate-automation brands, including LiftMaster, DoorKing, Elite, and Mighty Mule. We stock common boards, arms, and safety parts for these systems locally, which means a Southlake repair often gets completed on the first visit. See our brands for the full list and the parts we carry.
Pricing for Gate Repair in Southlake, TX
| Service | Typical range in Southlake |
|---|---|
| Keypad entry repair | $160 - $420 |
| Phone entry repair | $200 - $550 |
| Video intercom repair | $250 - $600 |
| Gate operator repair | $180 - $450 |
| Swing gate motor replacement | $350 - $850 |
| Control board replacement | $250 - $650 |
| Hinge replacement | $120 - $380 per hinge |
| Post replacement | $350 - $900 per post |
| Custom welding | $150 - $500 per point |
| Gate roller replacement | $150 - $400 per roller |
Two things push Southlake prices toward the upper end of these ranges: HOA-matched finishes on visible ironwork and the heavy custom gates that require more careful support work. Every price you see here is quoted in writing before any work begins, with a photographed record when the technician leaves.
Neighborhoods We Serve in Southlake
We dispatch technicians across all of Southlake, and we know the gate profiles in the city’s larger estate communities well. Most jobs can be reached the same day.
- Timarron
- Shady Oaks
- Carillon
- Clariden Ranch
- Estes Park
Service Area - Cities Near Southlake
We also serve the communities immediately around Southlake. If your gate is in Colleyville, TX, Grapevine, TX, Flower Mound, TX, or Bedford, TX, the same written-price guarantee and documented photo record apply.
Serving Southlake, TX - Our Local Coverage Area
We’re based in the Southlake area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Southlake
We dispatch locally and most Southlake jobs are reached the same day. A live person answers the phone 24 hours a day, seven days a week, and you get a written price before any work begins. Call (817) 826-9477.
Many Southlake HOAs govern visible gate changes. Repairs that restore the original appearance usually don’t require approval, but any alteration to the gate’s look should be checked with the association first. We can document the scope for your HOA file.
No. Estimates are free and every price is written before any work begins. If you already have a written estimate from another company, we’ll review it at no charge as a free second opinion.
Call (817) 826-9477 for a free estimate on gate repair in Southlake. A live person answers, and you’ll get a written price before any technician picks up a tool.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Southlake Customers Say
"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.