Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Colleyville
Most gate repairs in Colleyville run between $185 and $420 for common fixes like hinge realignment, sensor replacement, and control board diagnostics. We dispatch technicians from our Dallas-Fort Worth office to Colleyville daily, usually arriving within 48 hours for scheduled work and much faster for gate failures that leave a driveway unsecured. If your gate is stuck open, dragging on the ground, or refusing to open at all, call (817) 826-9477 and a live person answers, day or night. We hand you a written price before any tool comes off the truck.
Why Colleyville Homeowners Call Vance Gate Repair
Colleyville’s residential stock is almost entirely large-lot custom and semi-custom homes built between the late 1980s and the early 2000s, and nearly every property has an automated ornamental iron or custom aluminum driveway gate. Those gates are now 25 to 35 years old, and they’re failing in patterns we’ve learned to recognize by neighborhood. The Colleyville call we take today is rarely the first sign of trouble. It’s usually the day the gate finally stopped moving entirely.
Our Gate Repair team has worked on thousands of these systems across DFW, and Colleyville keeps us busier than most. Why? The combination of aging Viking, Elite, and LiftMaster operators plus North Texas clay soil shifting post footings. We know what that looks like before we arrive, and we bring the parts to fix it, not just diagnose it.
Every Colleyville job runs under The Haven Standard. That means a written scope, a written price, and a photographic record of what we found, what we adjusted, and what we installed. You get the photos. We file them. The next technician, whether ours or someone else’s, never has to guess what was done.
Our Gate Repair Services in Colleyville
Electric Gate Repair
Electric gate systems in Colleyville run on a loop: motor, control board, sensors, wiring. When one link fails, the whole system misbehaves. We trace the circuit, test the board, and replace only what’s dead. A lot of companies quote a full operator replacement when the actual problem is a $40 limit switch or a corroded wire nut. We show you the failed part in the photo log before we leave.
Automatic Gate Repair
Automatic gates on Colleyville’s estate lots are typically dual-swing actuators or rack and pinion slide gates, often tied to keypad entry and intercom systems. When the automation fails, the gate either won’t move, moves halfway and stops, or reverses for no visible reason. We service all nine major automation brands, including LiftMaster, Viking, Elite, DoorKing, and Mighty Mule, so we repair our Gate Motor & Opener in Colleyville already on your property instead of steering you toward a replacement you don’t need yet.
Hinge & Post Repair
Here’s the Colleyville-specific truth: most gate hinges and posts on custom homes are original to the 1990s installation. The hinge welds and post footings were never designed for 30 years of clay soil movement. We regularly pull leaning swing gates on Glade Road and in neighborhoods off Cheek-Sparger Road where the hinge post has drifted 2 or 3 inches out of plumb. That’s not a hinge grease job. That’s a footing excavation, a new concrete pour, and a realignment under load.
Gate Realignment
When a gate drags, binds, or sits visibly crooked, the fix is usually realignment rather than part replacement. We check the post plumb, the hinge pin wear, the operator travel limits, and the track level on slide gates. Then we reset everything to spec and document the before and after with photographs. A properly realigned gate should travel through its full arc without hesitation or grinding.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Colleyville
We work on whatever automation is already bolted to your gate. LiftMaster and Elite units are common across Colleyville’s 1990s estate gates. Viking operators show up on many of the older slide gates. DoorKing and Mighty Mule appear on newer installations and on ranch-style properties along the Colleyville-Grapevine border. We stock control boards, remotes, photo-eyes, and limit switches for all of them, which means less waiting on parts and no pressure to swap a good motor for a new one simply because we don’t carry the brand.
Common Gate Repair Problems We See in Colleyville Homes
- Clay-shifted posts and footings. Colleyville sits on expansive Blackland-adjacent clay. After a wet spring, the soil swells. After a dry summer, it shrinks. The posts heave and tilt, and a gate that closed perfectly in May drags the ground by August.
- Obsolete control boards from the 1990s. Viking and Elite boards from that era lack modern UL 325 safety inputs. They corrode internally, fail intermittently, and can’t always support current photo-eye and edge-sensor retrofits.
- Ice-storm damage to housings and brackets. Winter ice storms across DFW crack plastic operator covers and sensor brackets. Water gets into LiftMaster and FAAC units afterward, causing short circuits that show up months later.
- Worn rack and pinion tracks on slide gates. When posts shift, the rack tilts with them. The pinion gear chews the track teeth, the gate jumps, and the problem compounds until the gate binds completely.
Pricing for Gate Repair in Colleyville, TX
A service call and diagnostic in Colleyville runs $85 to $125, credited toward the repair if you proceed. Hinge and post realignment typically falls between $185 and $420 depending on how far the post has shifted and whether concrete work is required. Electric gate repairs, including sensor alignment, limit switch replacement, and wiring repair, usually run $140 to $320. Control board replacement for older LiftMaster or Viking units ranges from $350 to $680 parts and labor. Full operator replacement on a swing gate runs $900 to $1,800 installed, depending on brand and whether the existing arm bracket is intact. Every quote is written, handed to you before work starts, and honored at the final invoice.
| Repair Type | Typical Colleyville Price Range |
|---|---|
| Service call + diagnostic | $85-$125 |
| Hinge & post realignment | $185-$420 |
| Electric / sensor / limit switch repair | $140-$320 |
| Control board replacement | $350-$680 |
| Swing gate operator replacement | $900-$1,800 |
Call (817) 826-9477 for a free estimate. The number you hear is the number you pay. Written before work starts, per Haven Standard Clause 1, every single time.
We Also Serve Cities Near Colleyville
Our Colleyville crews regularly run service calls into Bedford, Euless, Southlake, and Hurst. If your property is in one of those nearby cities, the same written pricing, same photo documentation, and same Gate Repair team handles the work. Colleyville remains our focus for this page, but the standards don’t change at the city line.
Serving Colleyville, TX - Our Local Coverage Area
We’re based in the Colleyville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Colleyville
The clay soil under your gate posts shrank during the dry stretch, allowing the post to settle or tilt just enough to drop the gate’s leading edge onto the driveway. This is the single most common structural issue we see from Pleasant Run Road to Glade Road. The fix is a post re-set and gate realignment, not a new gate. Call (817) 826-9477 and we’ll confirm it with a level and a photo record.
Sometimes yes, sometimes the cheaper call is a full operator swap. Pre-2000 Viking boards often lack the input terminals for modern non-contact sensors and fail under retrofit. We’ll test the board, check for UL 325 compatibility, and give you a written quote for both the retrofit and the replacement if needed. You decide with real numbers in front of you.
The jumping is usually the pinion gear losing teeth against a rack that’s tilted because the post shifted. We see this repeatedly on the larger slide gates off Hall-Johnson Road. It can also be a worn track roller or a failed guide. We measure the post plumb and rack wear, then tell you exactly which component failed.
Put a level on the post. If the post reads out of plumb, the panel is sagging because its anchor moved, not because the panel bent. On Colleyville’s clay soil, a post that was dead vertical when installed can sit 2 or 3 degrees off within a decade. We check post plumb first on every swing gate we touch, because replacing a panel without fixing the post wastes your money.
Yes. Most Colleyville driveway gates are custom ornamental iron or aluminum with integrated keypads, intercoms, and sometimes vehicle loop detectors. We repair the mechanical gate and the automation, and we document the wiring so future service doesn’t require a second discovery call. Photos are part of every job under Haven Standard Clause 4.
If your gate is acting up in Colleyville, call (817) 826-9477 now. You’ll speak to a person, not a recording. We’ll schedule a time, show up with the right parts, and hand you a written price before anything gets taken apart.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Colleyville and the surrounding DFW metro since 2014.