Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Keller
If you’re searching for gate installation in Keller, TX, you’ve probably already figured out that the mid-2000s automatic gates across Hidden Lakes, Marshall Ridge, and the Bear Creek corridor are aging out simultaneously. A new driveway gate installation in Keller typically runs between $4,800 and $11,500 depending on the gate type, motor brand, and whether we’re adding automation to an existing manual gate or starting from bare posts. We dispatch technicians who know Keller’s clay soil and HOA requirements better than any crew driving in from Fort Worth. Call (817) 826-9477 for a written, line-item price before anyone picks up a tool.
Why Vance Gate Repair Lewisville Is Keller’s Preferred Gate Installation Company
Most Keller gate companies hand you a verbal estimate and hope the invoice matches. We don’t work that way. Adrian Vance built this company on a documentation habit from commercial access-control work: every installation gets a written scope, a written price, and a photo record of what was found, what was set, and what was installed. You get the paperwork before work starts and the photo log before we leave. That’s Haven Standard Clause 1 and Clause 4, applied to every Keller job.
Keller homeowners call us because we name the failure before we name the fix. A 2006 Mighty Mule operator that shudders when the gate opens is usually not a motor problem. It’s a post that heave-tilted in black gumbo and a hinge weld under stress. We identify it, price it, fix it. The 365-Day Done Right Promise means if a Keller installation isn’t right, we make it right within a full year, no argument and no fee.
Our Gate Installation Services in Keller
Driveway Gate Installation
Keller’s large brick-and-stone homes on generous lots were built for ornamental iron automatic driveway gates. The original installations, though, rarely included post footings deep enough for North Tarrant County’s expansive clay. We set 36-inch footings through the gumbo and reinforce the post bases so the gate doesn’t bind by August. Every driveway gate installation in Keller includes a written price for the gate, the operator, the power run, and the safety edges before we start.
Pedestrian Gate Installation
A pedestrian gate in Keller is usually part of a matched ornamental iron fence line in an HOA-governed community like Hidden Lakes or Villages of Woodland Springs. The gate and the operator have to match both the style requirements and the reality of clay-shifted posts. We install pedestrian gates with concrete-filled post footings sized for the soil, and we run the low-voltage wiring in conduit rather than direct-burial cable so a future repair doesn’t require trenching.
Sliding Gate Installation
Sliding gates on Keller’s larger lots along Bear Creek Road and in the equestrian-zoned pockets north of town have one advantage on gumbo: they ride on a track rather than hanging from posts. That means seasonal soil movement affects the track base instead of the hinge geometry. We pour a reinforced V-track base and set the operator with the proper limit adjustments, then photograph the settings so the next technician doesn’t have to rediscover them.
Swing Gate Installation
Double swing gates are the most common gate installation call in Keller, and they’re also the most vulnerable to the clay. The soil swells in spring, shrinks in drought, and the hinge posts move. We set posts at 36 inches, cross-brace the leaves, and install an operator matched to the leaf weight. A 16-foot double swing gate with a Ghost Controls or FAAC operator is a frequent spec in Marshall Ridge and the northwest subdivisions, and we price it with the leaf conversion in slave mode included from the start.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Keller
We install and service nine major gate-automation brands, so a gate installation in Keller doesn’t force you into replacing a motor that still works. If you have a LiftMaster, Ghost Controls, Elite, Mighty Mule, or DoorKing operator on the property, we’ll work with it. For new automation, we stock parts locally for Ghost Controls, Elite, and DoorKing systems so a Keller installation isn’t waiting on a pallet from California. One company, whatever motor is already mounted.
Common Gate Installation Problems We See in Keller Homes
- Builder-grade operator failure in the mid-2000s housing stock. Keller homes built between roughly 2003 and 2009 were frequently fitted with LiftMaster and Mighty Mule operators sized for a single-leaf gate, even when the gate was double. The motor fails early, and the replacement has to be spec-matched to actual leaf weight and cycle count.
- Black gumbo heave on gate posts. A gate installed level in March can bind at the latch by August because the concrete footings weren’t deep enough for the clay. We see this every week in Keller, regardless of gate age. Deep footings and reinforced post bases are the fix, done at installation rather than as a sag correction two years later.
- Winter Storm Uri wiring damage that was never fully repaired. February 2021 froze and cracked conduit and shorted control boards on hundreds of Keller driveways. Many homeowners patched enough to get the gate moving and stopped there. New installations often uncover corrosion and hidden shorts when old low-voltage runs are reused.
- HOA style restrictions with no allowance for soil movement. Keller’s governed communities specify gate styles and finishes, but many original installations skipped deep footings. The result is a two-year sag correction cycle that a properly engineered installation eliminates.
Pricing for Gate Installation in Keller, TX
A single swing gate with a new operator in Keller typically runs $4,800 to $7,200 installed. A double swing gate with matched operators runs $7,500 to $11,500. Sliding gates run higher, usually $8,000 to $13,000, because the track base and motor plate add concrete work. Pedestrian gates alone run $1,200 to $2,800. Adding automation to an existing manual gate starts around $2,400 and goes up if we’re trenching new conduit or adding a loop detector. The price you’re quoted is the price on the invoice. Written, line-item, before work begins. Call (817) 826-9477 and we’ll send a written estimate.
We Also Serve Cities Near Keller
Beyond Keller, our crews handle Gate Installation in North Richland Hills, Southlake, Colleyville, and Hurst. If you’re in one of those cities and need the same written-price, photo-documented service, call (817) 826-9477 and ask for a Keller dispatch.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Keller
Keller’s black gumbo clay swells when wet and shrinks hard in drought, which heaves shallow concrete post footings and puts the gate out of square. A gate installed with 18-inch footings will sag within two years. Our installations use 36-inch footings and reinforced post bases specifically for this soil, which eliminates the sag cycle instead of chasing it. If your gate is already sagging, call (817) 826-9477 for a written correction quote.
Usually yes, and that’s the honest answer. A 2005-era LiftMaster or Mighty Mule operator was often undersized for the gate it was paired with and has already outlived its design life by several years. If you’re installing a new gate in Keller, pairing it with the old operator means paying twice for the motor when it fails shortly after. We’ll match the operator to the new gate’s actual leaf weight and cycle count, and price it as a complete installation.
Yes. Uri froze and cracked wiring conduit and corroded low-voltage connections across hundreds of Keller driveways. If the old cable run is reused for a new installation, those hidden shorts can trip the new control board within weeks. We inspect the existing run with a resistance test before we quote, and if it’s suspect, we run fresh conduit. Call (817) 826-9477 to schedule an inspection.
Yes. Many Keller manual gates were installed during the 1995-2005 build boom with no thought given to power or low-voltage wiring, but that doesn’t mean you’re stuck. We trench new conduit, run the power, install the operator and safety edges, and bring the whole system up to code. The gate itself often stays. This is a standard installation for us, and the price is quoted in writing before we start.
A swing gate hangs from posts, so its geometry shifts with the clay. A slide gate rides on a track, so the base is what’s exposed to soil movement. On a flat Keller lot with room for the gate to slide, a slide gate often holds alignment better over time. On a sloped driveway or an HOA-governed streetscape that requires a swing style, we compensate with deeper footings. Either way, the installation is priced specifically for your lot, not from a generic catalog.
If you’re in Keller and the gate is failing, sagging, or simply not installed yet, call (817) 826-9477. We’ll give you a written price, a documented photo record, and a gate that stays square through the Texas heat and the gumbo heave.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Keller with written-price gate installation and repair.