Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Keller, TX
Gate access control in Keller usually means retrofitting a 15-to-25-year-old ornamental iron driveway gate with modern entry hardware, or reviving one whose keypad and wiring froze during Winter Storm Uri and never quite recovered. Most Keller jobs we see are on large brick-and-stone homes built between the mid-1990s and late 2000s, where the original operator still works but the access system no longer does. Whether it’s a dead keypad on a Mighty Mule opener or a phone-entry system that stopped talking to the gate, we diagnose it, price it in writing, and leave you a photo record of every adjustment. Call (817) 826-9477 for a free estimate.
Why Keller Homes Are Different
Keller’s build-out pattern created something unusual: a huge wave of automatic driveway gates installed within roughly fifteen years, and now they’re all aging on the same schedule. A 2004-era control board doesn’t care that it’s mounted to a $900,000 home off Bear Creek Parkway or a horse property north of town; it fails the same way. What matters is that Keller’s black gumbo clay expands and contracts enough to shift gate posts seasonally, which throws off the alignment that access-control sensors and limit switches depend on. We also see a lot of gates where the operator was replaced but the access wiring wasn’t, which is how a simple keypad failure turns into a long afternoon of tracing corroded low-voltage lines. The 2021 freeze left a particular signature here: cracked conduit and oxidized splices that work in dry weather and short out when it rains. A Keller gate is rarely a one-part fix, and we quote it that way from the start.
Our Main Keller Services
These are the three services Keller homeowners call about most. Each has its own page with local pricing, failure patterns, and what to expect on the job.
Gate Repair in Keller
Most repair calls in Keller start with a gate that won’t open, won’t close, or grinds at the end of travel. The soil movement under Keller’s concrete post footings means latch strikes and hinges drift out of alignment even on gates that were installed correctly. We repair the gate itself: re-setting posts, replacing hinges, straightening frames, and re-welding cracked pickets. Every repair includes a documented photo record and a written price before work starts. Details are on the Gate Repair in Keller page.
Gate Installation in Keller
New gates in Keller have to be built for the soil they sit on. We size the posts, the operator, and the access system together so the gate still closes square after two wet seasons. Whether it’s an ornamental iron driveway gate in an HOA community or a pipe-and-chain ranch gate on a larger lot, we measure, spec, and price everything in writing before ordering materials. Read the full scope on the Gate Installation in Keller page.
Gate Motor & Opener in Keller
The mid-2000s operators installed across Keller’s subdivisions are reaching the end of their service life now: actuators wear out, control boards fail, and the plastic housings crack in summer heat. We service nine automation brands and replace motors without steering you toward a full system swap when the operator still has life in it. Common failures, brand coverage, and local pricing are on the Gate Motor & Opener in Keller page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Keller
Access control in Keller is usually about a 15-to-20-year-old entry system that still mechanically works but no longer responds to the keypad, remote, or phone entry. These systems were common upgrades in master-planned communities built from the mid-1990s through the late 2000s, and they’re now failing in predictable waves: keypad membranes degrade in Texas heat, phone-entry modules lose dial tone, and the low-voltage wiring that survived Uri is often corroded inside the conduit. Gate Access Control is the service that gets you back in without replacing hardware that doesn’t need to die yet.
Keypad Entry
Signs you need it
The keypad accepts a code intermittently, fails in rain, or lights up but doesn’t trigger the gate.
What it costs in Keller
Keypad replacement or repair in Keller typically runs $95 to $290 depending on whether the wiring to the operator can be reused.
How we do it
We test continuity from the keypad to the control board, replace the failed component, reprogram codes, and photograph the finished wiring.
Phone Entry
Signs you need it
Callers hear ringing but the gate never opens, or the system opens the gate on every call regardless of who’s calling.
What it costs in Keller
Phone-entry repair or replacement in Keller typically runs $310 to $595, with the higher end covering a new cellular or VoIP-compatible module.
How we do it
We check the phone line or cellular connection, test the relay output at the board, swap the module if needed, and load your directory before we leave.
Remote Control
Signs you need it
Remotes work only from inside the driveway, only at short range, or stop working altogether after a power surge.
What it costs in Keller
Remote programming or receiver replacement in Keller typically runs $145 to $260 per opener, including new remotes if the old ones can’t be re-paired.
How we do it
We confirm the receiver frequency, clear stale codes, pair the remotes, and document the final programming so future service takes minutes instead of hours.
What Gate Access Control Costs in Keller
| Item | Typical range in Keller |
|---|---|
| Keypad entry repair or replacement | $95 - $290 |
| Phone entry module repair or replacement | $310 - $595 |
| Remote programming or receiver swap | $145 - $260 |
Can you add a keypad to an existing gate opener in Keller?
Yes, in most cases. We add a wired or wireless keypad to the existing operator as long as the control board has an open input. The job usually takes under an hour and includes programming. Call (817) 826-9477 for a written quote.
Does phone entry work if I don’t have a landline in Keller?
It can. Many Keller homes have dropped landlines since Uri, and we install cellular adapters or VoIP-compatible modules that keep phone entry working without a copper line. The conversion usually runs $310 to $595 installed.
Gate Parts & Welding in Keller
Parts and welding in Keller follow a clear pattern: the gate itself is fine, but the hinge pulled out of the post, a rail cracked where the operator connects, or the latch strike no longer meets the post because the black clay moved it. The region’s expansive soil means welded repairs have to account for seasonal movement, or the same crack comes back in 18 months. Gate Parts & Welding is the work we do to keep a gate serviceable rather than replacing the whole structure for one failed component.
Hinge Replacement
Signs you need it
The gate sags, scrapes the ground, or the hinge bolts pull loose from the post masonry.
What it costs in Keller
Hinge replacement on a Keller driveway gate typically runs $150 to $430 per hinge, depending on gate weight and whether we weld or bolt the new leaf in place.
How we do it
We support the gate, cut or unbolt the failed hinge, align the leaf on both planes, and weld or fasten the replacement with the gate under load.
Custom Welding
Signs you need it
A picket snapped off at the weld, a rail cracked through, or a design change needs new metal fabricated in place.
What it costs in Keller
Custom welding on a Keller ornamental or ranch gate typically runs $210 to $650, depending on the footage of weld and the thickness of the material being repaired.
How we do it
We grind the failed weld clean, fit the new or existing metal, weld it, and coat the repair to match the surrounding finish.
Gate Rollers
Signs you need it
A slide gate jumps the track, squeals, or stalls because a roller bearing seized.
What it costs in Keller
Roller replacement on a Keller slide gate typically runs $280 to $560 when we do both the roller and the track alignment in one visit.
How we do it
We measure the existing roller spacing, replace the failed wheel assembly, align the track, and test the gate through full travel.
What Gate Parts & Welding Costs in Keller
| Item | Typical range in Keller |
|---|---|
| Hinge replacement (single) | $150 - $430 |
| Custom welding repair | $210 - $650 |
| Slide gate roller replacement | $280 - $560 |
Can you weld ornamental iron without ruining the finish in Keller?
Yes. We grind the repair area, weld it, and coat the heat-affected zone to match the surrounding finish. On powder-coated Keller gates we can usually match the sheen closely enough that the repair disappears. Call (817) 826-9477 for a written price.
Is it worth welding a cracked gate rail, or should I replace the gate in Keller?
If the rest of the gate is structurally sound, welding the rail is almost always the better money. We inspect the full frame for fatigue before we quote the repair, and we’ll tell you plainly if replacement is the only honest fix.
Brands We Service in Keller
We work on whatever operator is already mounted to your Keller gate: Ghost Controls, DoorKing, Elite, Mighty Mule, and the other major automation names we stock parts for. We keep common boards, remotes, and receivers in local inventory rather than ordering every part from a distributor, which shortens most repair timelines to a single visit. See our brands page for the full nine-brand list.
Pricing for Gate Repair in Keller, TX
| Service | Typical range in Keller |
|---|---|
| Keypad entry repair or replacement | $95 - $290 |
| Remote programming or receiver swap | $145 - $260 |
| Hinge replacement (single) | $150 - $430 |
| Custom welding repair | $210 - $650 |
| Slide gate roller replacement | $280 - $560 |
| Phone entry module repair or replacement | $310 - $595 |
Prices in Keller push upward when the job involves corroded Uri-era wiring that has to be re-pulled, or when a gate post has heaved so far out of level that the repair can’t be completed without re-setting the footing. Every price is written down and handed to you before work starts, so the number above is the number you pay.
Neighborhoods We Serve in Keller
We work across Keller’s residential and equestrian-zoned pockets, from the HOA communities near Bear Creek Parkway to larger-acreage properties on the north side of town. Different neighborhoods have different gates and different soil behavior, and we quote accordingly.
- Hidden Lakes
- Marshall Ridge
- Bear Creek Park area
- North Keller acreage
- Melody Hills
Most Keller jobs are reached within the same day for repair calls, and we schedule installation and welding work by appointment with a written scope first.
Service Area - Cities Near Keller
We also serve the communities that circle Keller, including North Richland Hills, TX, Southlake, TX, Colleyville, TX, and Hurst, TX. The same written-price standard applies on every job, no matter which driveway we’re parked in.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Keller
For repair calls, we typically dispatch to Keller the same day you call. A live person answers at (817) 826-9477 at any hour. Installation, custom welding, and new access-control systems are scheduled with a written scope first.
In Keller’s HOA-governed communities, yes, most exterior gate work requires approval before we start. We can provide the written scope and equipment specifications your HOA will ask for. Many Keller HOAs want to see the operator model and access method in writing before signing off.
The soil moves every season, but a properly set post and correctly aligned gate will tolerate it. When we re-set a Keller post, we adjust the depth and bearing so the gate still latches square through wet and dry cycles. We also document the alignment so future adjustments take minutes.
Contact
If you have a gate in Keller that won’t open, won’t close, or won’t answer the keypad, call (817) 826-9477 for a free estimate. We’ll put the price in writing before any tool comes off the truck.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Keller Customers Say
"The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B.