Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Keller
Gate repair in Keller, TX usually costs between $185 and $850 depending on whether we’re re-setting a heaved gate post, replacing a control board, or welding a cracked hinge. Most Keller jobs are completed same-day once our technician arrives with the right parts. The reason pricing stays predictable here despite the clay soil and aging operators comes down to documentation: we write the scope, hand you a flat price before any tool comes off the truck, and photograph everything we touch. If your gate is grinding, sagging, or dead at the keypad, call (817) 826-9477 and a live person answers, any hour.
Why Vance Gate Repair Lewisville Is Keller’s Preferred Gate Repair Company
Keller homeowners call us because the gate problem they’re facing is usually one we’ve already documented on another street in Hidden Lakes or Marshall Ridge or along Bear Creek Parkway. Adrian Vance started this company in 2014 working commercial access-control sites before bringing the same habits to residential driveway gates, so when one of our technicians walks a Keller property they’re looking for the same things every time: what failed, what caused it, and what evidence we can hand you before leaving. That means a written price before work begins, per Haven Standard Clause 1, and a photo log of every adjustment under Clause 4. No gate company in Keller can show you more of what they actually did on the job.
Dispatch for Keller is coordinated from our Dallas-Fort Worth office, with crews dispatched locally to Keller neighborhoods like Hidden Lakes, Villages of Woodland Springs, and Marshall Ridge. Background-checked, uniformed technicians arrive with the gate operator brands and common Keller-specific parts already on the truck including post brackets, hinge weld plates, control boards, and photo-eyes for LiftMaster and Ghost Controls systems. You get the technician’s name and photo before arrival. You’re not getting a subcontractor who’s never seen a Keller black-gumbo post footing before.
Our Gate Repair Services in Keller
Electric Gate Repair
Most electric gate repair calls in Keller trace back to one of two things: a dead or intermittent control board, or corroded low-voltage wiring from Winter Storm Uri in February 2021 that was never fully inspected. We see it constantly in the mid-2000s subdivisions where the original builder-grade operators are now 15 to 20 years old. Our Gate Repair team carries replacement boards, transformers, and photo-eyes for Keller’s most common installed brands. If the gate hums but won’t move, if it opens but won’t close, or if the keypad lights without triggering the motor, call us and describe exactly what it’s doing. We can usually tell you over the phone whether it’s the board or the wiring.
Automatic Gate Repair
Automatic gate repair in Keller often comes down to the operator, not the gate itself. Those mid-2000s LiftMaster, Elite, and Mighty Mule units from the original build-out are aging out now, and Keller summers above 100°F degrade plastic housings and rubber seals faster than the manufacturers’ ratings assume. We service nine automation brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we work on whatever motor is already on your property. We don’t steer you toward replacement unless the existing unit is genuinely beyond repair.
Hinge & Post Repair
This is the single most common gate repair call in Keller, and the reason is the soil. North Tarrant County’s expansive black clay, what locals call black gumbo, swells hard when it rains and shrinks hard in drought. That movement heaves concrete gate-post footings out of plumb seasonally, which throws the hinge alignment off and leaves the latch striking empty air. We excavate the footing, re-set the post with deeper concrete and rebar tie-ins, then correct the gate leaf alignment. A Keller gate post that’s visibly leaning is not a cosmetic issue; it will chew through hinge bearings and latch hardware until it’s fixed.
Gate Realignment
Gate realignment in Keller usually follows a post repair, but it also stands alone when the gate leaf has sagged on its hinges or dragged against the driveway. A gate that scrapes the concrete is adding stress to the operator every single cycle, and on a Keller driveway with a slight slope that means the actuator is working against gravity plus friction. Our technicians measure the gap at the hinge side and the latch side, correct the leaf position, and photograph the new measurements. You get those photos before we leave.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Keller
Because Keller’s housing stock skews toward mid-2000s subdivisions and larger equestrian-style lots along the Bear Creek corridor, the mix of brands we see here is predictable. LiftMaster and Elite dominate the HOA communities; Ghost Controls and Mighty Mule show up on the larger acreage properties in north Keller. We stock common boards, receivers, photo-eyes, and limit switches locally for Keller dispatch, which means fewer return trips and faster same-day repairs. If the part isn’t on the truck, we order it in writing with an arrival date before we leave the property.
Common Gate Repair Problems We See in Keller Homes
- Gate posts heaving out of alignment from black gumbo clay. This is Keller’s signature gate failure, and it’s far less common in neighboring cities with sandier soil. The post tilts, the latch misses, and the gate starts binding at the hinge.
- Builder-grade operators from the mid-2000s failing now. Control boards short, actuators wear out, plastic housings crack from heat exposure. When one home in a Keller subdivision has a failure, we usually see two or three more on the same street within a season.
- Unresolved Winter Storm Uri damage in low-voltage wiring. The February 2021 freeze cracked conduit and shorted boards across hundreds of Keller driveways. Many homeowners patched just enough to get the gate moving again and never had the full electrical system inspected. We still find Uri-related corrosion on “simple” repair calls today.
- Sagging gate leaves dragging on sloped driveways. Keller’s terrain rolls more than people expect, and a heavy ornamental iron gate on a sloped driveway works the hinges and actuator harder. A gate that drags is a gate that will eventually kill its own operator.
Pricing for Gate Repair in Keller, TX
Here’s what we charge for the common Keller jobs, in writing, before any work starts. Hinge and post repair in Keller typically runs $350 to $850 depending on whether we’re re-setting one post or two, and whether the footing needs excavation below the frost line. Gate realignment runs $185 to $325 when the posts are still sound. Electric gate repair, meaning control boards, wiring repairs, or photo-eye replacement, runs $240 to $680 depending on board brand and wiring access. A full actuator replacement on a Keller swing gate runs $950 to $1,600 installed. Every one of those prices is flat, written, and agreed before we pick up a tool. If another company gave you a written estimate, bring it in and we’ll review it against ours at no charge.
We Also Serve Cities Near Keller
Our crews dispatch to Keller, North Richland Hills, Southlake, Colleyville, and Hurst daily, so if your property sits on the edge of Keller near a neighboring city line, we’ll still get to you quickly. For more on our full service area coverage, see Gate Repair in Keller and our local service pages for surrounding communities.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Keller
Because your gate posts are moving with the black gumbo soil. Keller’s expansive clay swells after spring rains and shrinks during fall dry spells, heaving the post footings enough to shift the latch strike by a quarter inch or more. That’s all it takes. The fix is re-setting the post with a deeper footing and rebar tie-ins, then re-aligning the gate leaf. If you’d rather not wait through another season of latching problems, call (817) 826-9477 and we’ll schedule a post inspection.
If the operator is a LiftMaster or Elite from the mid-2000s and the failure is the control board, actuator, or plastic housing, repair usually makes sense if the motor itself is still quiet and the board is available. Those units were built well, and a new board often buys you another five to eight years. The honest answer depends on what we find when we open the housing, and we’ll show you the evidence before recommending either path. Call (817) 826-9477 and we’ll give you a written repair price and a replacement price side by side.
Check the low-voltage wiring conduit for cracks and corrosion first, especially where the wire enters the ground and where it passes through the gate post. Uri froze water inside Keller conduit runs, and when that ice expanded it split the PVC and exposed copper to moisture. What looks like an intermittent dead gate now is often corroded wire making weak contact. We’d recommend a full low-voltage inspection and a documented photo record of every connection point. It’s the only way to know the patch job isn’t hiding a slow-failing circuit.
Yes, in most cases. The power run is the main variable. Keller lots with an existing conduit stub from the original build are straightforward; if there’s no conduit, we can often run low-voltage along the fence line or bore under a short driveway section without full excavation. The gate itself needs to be structurally sound and not sagging at the hinges before an operator goes on it. We’ll measure the gate, check the post footings, and give you a written installation price that includes the operator, the power run, safety edges, and programming.
Sometimes it is just the hinges, but in Keller we always check the post footing first because of the clay soil. A sagging gate is usually a symptom of a post that has tilted or settled, and simply replacing hinge hardware won’t fix a post that’s still moving. If the hinges are the sole failure, that’s a straightforward weld or bolt-on hinge replacement. If the post is moving, the fix is excavation and re-set. Either way, the price is written and agreed before the repair starts.
Contact Vance Gate Repair Lewisville for Gate Repair in Keller
If your Keller gate is sagging, dead, grinding, or just not latching like it used to, call (817) 826-9477 for a free estimate. A live person answers 24/7, we dispatch to Keller neighborhoods daily, and you’ll have a written price in hand before any work begins. Every repair carries the 365-Day Done Right Promise: if it’s not right within a full year, we make it right at no charge. And because our crews document every visit with photos, you’ll know exactly what we found, what we set, and what we left behind.
Written by Adrian Vance, Owner at Vance Gate Repair Lewisville, serving Keller and the surrounding North Tarrant County communities since 2014.
Gate Repair in Nearby Areas