Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across North Richland Hills
Gate repair in North Richland Hills usually means one of three things: a hinge post that has heaved out of plumb in the clay, a motor that stopped talking to its limit switch, or a cedar panel that took a spring storm broadside. Most calls we run in this city are repaired the same day, and the written price is in your hand before we unload a single tool. If your gate is sagging, locked out, or hanging off its post, call us at (817) 826-9477 and describe what’s happening. We serve every subdivision in North Richland Hills, from Fossil Creek to the neighborhoods off Rufe Snow and Davis Boulevard.
Why Vance Gate Repair Lewisville Is North Richland Hills’s Preferred Gate Repair Company
Vance Gate Repair opened in 2014, and Adrian Vance built the company on commercial access-control documentation before bringing that same habit to residential gates. That matters in North Richland Hills because the gates here are mostly 30 to 45 years old, and a repair without a written record means the next technician starts from zero. Our Gate Repair team leaves every North Richland Hills job with a photo log of what was found, what was adjusted, and what was installed. You get that record; we keep a copy in our file. Under Clause 4 of The Haven Standard, that documentation is not an upsell. It’s standard.
Reviews from North Richland Hills customers tend to mention the same three things: the price was written before work started, the technician was background-checked and in uniform, and the gate worked when they left. A live person answers the phone at (817) 826-9477 at any hour, seven days a week. No voicemail tree, no answering service. When a storm takes down a gate at midnight in North Richland Hills, you reach a person who can dispatch a crew, not a recording.
Our Gate Repair Services in North Richland Hills
Electric Gate Repair
Electric gate repair in North Richland Hills typically runs between $180 and $420 for control-board diagnostics, limit-switch resets, and wiring faults. A full operator replacement on an existing swing or slide gate generally lands between $1,200 and $3,400, depending on the motor brand and whether the mounting brackets are still sound. We service what is already on the property rather than steering you toward a new unit, and we work on Viking, Ghost Controls, DoorKing, Elite, LiftMaster, FAAC, BFT, Linear, and Mighty Mule. On 30-year-old NRH gates, the most common electrical failure is not the motor itself; it is a corroded wire connection or a limit switch that has drifted 10 to 15 degrees past where it should stop.
If your gate opens partway and reverses, or the keypad does nothing at all, call us and describe the behavior. We will give you a written quote before any work begins, and the price is the price.
Automatic Gate Repair
Automatic gates in North Richland Hills take a beating from the Blackland clay under them and the wind against them. When the gate is pushed out of alignment, the operator has to work harder, current draw goes up, and the board eventually faults out. We fix the mechanical alignment first, then address the operator. Most automatic gate repairs in NRH cost $220 to $680, and that includes re-setting travel limits and testing the safety loop and photo-eyes after the gate is true again. A photo-eye, the infrared beam that stops the gate if something crosses the path, often gets knocked out of alignment by a post shift, not by the storm itself. We check it every time.
Hinge & Post Repair
In North Richland Hills, hinge and post repair is the default job, not the exception. The expansive clay beneath this city swells after spring rains and shrinks through summer drought, and every wet-dry cycle inches posts further out of plumb. We regularly see gates where the hinge side is 3 to 4 degrees off vertical, the latch side is dragging on the ground, and the post base is soft enough to probe with a screwdriver. Post repair here usually means cutting the old post at grade, digging out the rotted footing, and pouring a new concrete base, then resetting the gate and re-hanging the panel. Expect $380 to $900 for a single post replacement, more if brick or stone column work is involved.
Gate Realignment
Gate realignment in North Richland Hills costs $190 to $450 for most swing and drive gates, and it fixes about half of the “I think I need a new gate” calls we get. The panel itself is usually fine. The post has moved, the hinges are worn oval, and the gate is now racked. We bring the post back to plumb where possible, replace worn hinge pins and bushings, and reset the latch so it actually catches. In HOA-governed neighborhoods across NRH, a realigned gate that matches the existing cedar stain keeps the board off your back and avoids a full replacement permit conversation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in North Richland Hills
We service nine automation brands across North Richland Hills, and we keep common parts for Viking, Ghost Controls, DoorKing, and Elite on our trucks because those four show up repeatedly in this city’s older subdivisions. That means a transformer swap or a limit-switch reset often happens the same visit, not a week later waiting on a part. Our techs are trained on every brand we carry, and we do not push one brand over another; we fix what you own. The one thing we insist on, regardless of brand, is that the safety devices, photo-eyes, loop detectors, and edge sensors, are tested and documented before we leave.
Common Gate Repair Problems We See in North Richland Hills Homes
- Blackland clay heaving shifts hinge posts out of plumb. The gate sags, the latch misses the strike, and the operator stalls out even though the hinge hardware looks intact. This is the single most common failure we see in NRH, and it usually requires post work, not just hinge adjustment.
- Spring storm winds blow out aged cedar pickets and crack panels. North Richland Hills sits in a severe-thunderstorm corridor, and the 30-to-40-year-old gates in Fossil Creek and surrounding neighborhoods lose boards or full panels every April and May. We keep extra pickets and hinges stocked through spring for same-week emergency calls.
- Power cuts leave electric gates locked, and the manual release is buried or forgotten. During a power cut, every automatic gate has a manual release mechanism, but on a 30-year-old operator, that release lever is often corroded, painted over, or missing its handle. We teach homeowners where the release is and how to use it safely, and we can replace a seized release on the spot.
- Tree limbs over mature lots come down on gates. Many NRH backyards have post oaks and cedar elms planted when the house was new. Forty years later, a limb weighing 400 pounds drops on a gate in a spring storm and the damage is structural, not superficial. We handle the gate; you may need a tree company for the limb.
Pricing for Gate Repair in North Richland Hills, TX
Here are the numbers we quote most often in North Richland Hills. Gate realignment and hinge work: $190 to $450. A single hinge-post replacement with new concrete footing: $380 to $900. Electric gate repair and control-board diagnostics: $180 to $420. Full automatic operator replacement: $1,200 to $3,400 depending on brand and whether the mounting hardware is reusable. A complete gate panel replacement in cedar, cut and stained to match your fence: $500 to $1,400. These are written, flat quotes, not estimates with wiggle room. Before any work starts, you get a line-item price and you approve it. Free second opinion: bring us any written estimate from another company and we will review it, on our time, at no charge.
We Also Serve Cities Near North Richland Hills
Vance Gate Repair runs crews into North Richland Hills daily, and we also take calls from Hurst, Bedford, Colleyville, and Keller. If your gate is in one of those nearby cities, the same written pricing and documentation standard applies. Call (817) 826-9477 and we will get you on the schedule.
Serving North Richland Hills, TX - Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in North Richland Hills
The soil under North Richland Hills is expansive Blackland Prairie clay, and it swells when wet and shrinks when dry. Over decades of wet-dry cycles, that movement works fence and gate posts loose from their footings, even when the above-ground wood looks fine. The post heaves, the gate sags, and the problem gets worse every year. Fixing it usually means a new concrete footing, not just shimming the hinges. Call (817) 826-9477 and we will tell you what your specific post actually needs.
Every automatic gate has a manual release, usually a lever or pull chain near the operator head, that disengages the motor so you can push the gate by hand. On older North Richland Hills gates, that release is often corroded, painted over, or impossible to find without a flashlight and some patience. When we service a gate in NRH, we locate the manual release, test it with the power off, and show you how to use it safely. If yours has seized, call us at (817) 826-9477 and we will replace it.
In most of North Richland Hills’s established subdivisions, the answer is yes if the replacement changes the material, height, or finish. Many HOAs here require the gate to match the fence in material and stain color, and some specify cedar board-on-board construction. We match what is already there and can provide a written scope and photo documentation if your HOA asks for it. Replacing like-for-like, same material, same color, same height, rarely triggers a review, but check your deed restrictions anyway.
The panel is rarely the problem. The post has shifted in the clay, the hinge bushings have worn oval, or the gate was never properly hung to begin with, and the racked geometry makes it drag. A sagging gate in North Richland Hills can often be corrected with hinge and bushing replacement plus a post reset, without buying a new gate. The fix runs $190 to $450 for most gates, and we will quote it before we touch it.
Yes. Any automatic gate installed or serviced in North Richland Hills needs functioning safety sensors, which usually means photo-eyes and often a reverse edge or loop detector, depending on the gate’s use and placement. UL 325 compliance applies, and a gate without working safety devices is a serious hazard. We test every safety component on every automatic gate service call, and we document the test results in the record we leave with you. If a sensor has failed or been bypassed, we will quote the replacement in writing before starting work.
When your gate is down in North Richland Hills, call (817) 826-9477. A live person answers, we give you a written price before any work begins, and every job leaves a documented record.
Written by Adrian Vance, Owner at Vance Gate Repair Lewisville, serving North Richland Hills since 2014.