Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Parts & Welding in Lewisville: What to Know First
We provide independent Ghost Controls gate parts and welding in Lewisville, typically completing most hinge, post, rail, and roller repairs within one to three business days after your written estimate is approved. The price is documented and handed to you before any work starts, not after. If you own a Ghost Controls opener and the gate itself has failed, call (817) 826-9477 and we’ll tell you what we think it is, what it costs, and when we can be there.
This page is for Lewisville homeowners whose Ghost Controls motor still works but whose gate is dragging, sagging, won’t latch, or has a hinge tearing out of the post. We also service LiftMaster, Mighty Mule, and DoorKing systems for neighbors with a different brand on the property.
How Ghost Controls Products Fail - and How We Fix Them
Ghost Controls builds solid residential swing and slide gate operators, but the mechanical parts that carry the load fail in predictable ways. Here’s what we see on Ghost Controls gates in Lewisville, especially the older homes around Vista Ridge Mall and the Highland Village border.
- Hinge weld fatigue on the RJO and TSS1 series: Ghost Controls’ heavier swing gate kits place substantial leverage on the top hinge, and the factory welds where the hinge plate meets the post bracket begin to crack under repeated cycling. We cut out the fatigued weld, re-weld with proper penetration, and add a gusset where the gate geometry allows. The symptom is a gate that sags progressively over weeks, then suddenly drops an inch in a day.
- Rail wear on slide gate models: On the SLD-series slide gates, the steel track rail takes the full weight of the gate. We find rollers that look fine but have flat-spotted bearings, which scores the rail and forces the Ghost Controls motor to work harder than it should. Our fix is a roller replacement and rail grinding to remove burrs before the rail requires full replacement.
- Post lean on the V-hinge and post-pivot kits: Ghost Controls’ pivot-mount swing arms bolt to a post that often wasn’t set in enough concrete. In Lewisville’s clay soil, which heaves with moisture changes, a 4×4 wood post or a shallow-set steel post will lean. We remove the post, set a proper-depth steel post in concrete, and re-hang the gate. The gate itself rarely needs replacement; the foundation does.
- Latch and lock misalignment on the TSS1 and AXDP series: When the gate sags even a quarter inch, the Ghost Controls solenoid lock and the mechanical latch stop lining up. The opener keeps running because the limit switch doesn’t know the latch didn’t engage. We correct the gate alignment first, then re-align the latch and verify the lock bolt drops cleanly.
- Custom welding mods on older Ghost Controls installations: Some Lewisville homes have gates that predate the Ghost Controls opener, and the previous installer made questionable welding choices. We address those: re-welding cracked brackets, shortening or extending the gate leaf to correct geometry, and adding a reinforcement plate where the arm attaches. A Ghost Controls motor is only as reliable as the metal it pushes.
Our Ghost Controls Gate Parts & Welding Process
Every Ghost Controls job follows the same sequence, because documentation is the difference between a repair and a guess.
- 1
Call and describe the problem. You talk to a live person, any hour. We ask what the gate is doing, what the motor does, and what the metal looks like where it’s failing.
- 2
We inspect and photograph. A technician arrives, names the part that failed, and photographs everything: the hinge, the post base, the rail condition, the weld points.
- 3
You get a written price before work starts. The flat price covers the parts, the labor, the welding, and the cleanup. If we find something unexpected during the job that changes the price, we stop and call you before touching it.
- 4
We decide on OEM or quality aftermarket parts, with you. Ghost Controls OEM parts preserve manufacturer warranty coverage. Quality aftermarket parts can be a better value when the gate is older and warranty is no longer a factor. We show you both options and explain the trade-off in plain terms.
- 5
The repair happens. Welding, hinge replacement, rail work, roller replacement, latch work. The technician works clean and does not leave grinding dust or slag behind.
- 6
Test cycle and documentation. We cycle the gate through full travel under load multiple times, photograph the finished work, and hand you a written record of part numbers, adjustments, and photos. That record is yours to keep.
BeforeAfterWhat Ghost Controls Gate Parts & Welding Costs in Lewisville
Here are the numbers we give Lewisville homeowners, in writing, before we start. These are flat prices for the work as described.
- Hinge replacement (welded steel hinge, single gate): $240-$420, depending on gate weight and whether the post bracket needs rebuilding.
- Post replacement and reset in concrete: $380-$700, including the new steel post, concrete, and re-hanging the gate.
- Slide gate rail repair (grinding and roller replacement): $180-$350, depending on rail length and roller type.
- Custom welding (crack repair, bracket fabrication, gate modification): $150-$400, quoted after we see the failure and measure the gate.
- Latch and lock realignment: $120-$220, including test cycling the Ghost Controls opener to confirm the solenoid engages.
What moves the price: gate weight, whether we’re fabricating a new bracket versus re-welding an existing one, and whether concrete work is required. You’ll know the exact number before we pick up a tool. Estimates are free.
Why Lewisville Homeowners Call Vance Gate Repair Lewisville for Ghost Controls Work
Most gate companies in Lewisville will look at a Ghost Controls system and offer to replace the whole thing. We don’t work that way. We’ll repair the gate, replace the part, and re-weld the bracket, because the motor on your property still works and a written price for repair is usually a fraction of replacement.
Every job comes with our 365-Day Done Right Promise: if the repair isn’t right, we make it right at no additional charge within a full year. Every visit includes a documented photo record under Haven Standard Clause 4: what was found, what was set, and what was installed. And we understand Ghost Controls specifically, while also working on LiftMaster, Mighty Mule, DoorKing, and the other brands that show up at Lewisville properties.
Adrian Vance grew up in Queens, NY, where watching tradespeople work on the old iron fences along his block was the closest thing he had to after-school entertainment. He trained in electrical and mechanical systems at the New York City College of Technology before spending years in commercial access-control installation, which is where he learned that a gate is only as reliable as the documentation behind it. Name what you found, name what it costs, name what you left behind.
FAQs
We use both, and the choice is yours to make with our input. If your Ghost Controls opener is still under warranty, we recommend OEM parts to protect that coverage. If the warranty has expired or the failed part is a weld, bracket, or hinge that Ghost Controls doesn’t sell as a standalone replacement, quality aftermarket or fabricated parts are often the right call. We show you both options and the price difference before any work starts. Call (817) 826-9477 and we’ll tell you what applies to your gate.
Most Ghost Controls gate parts and welding repairs in Lewisville are scheduled within one to three business days. Emergency situations, such as a gate that won’t close or a post that’s leaning into a driveway, are prioritized. A live person answers the phone 24/7, and you’ll get a named technician with a scheduled window before we arrive.
Yes, and we do it regularly. The two most common welding jobs on Ghost Controls gates in Lewisville are re-welding hinge plates that have cracked under repeated cycling, and fabricating reinforcement brackets for the operator arm attachment point. The welding is done on-site, and the repaired area is primed and painted before we test the gate. We’ll quote the job in writing before the welder starts.
If the motor runs and the gate structure is sound, repair is almost always the better financial decision. A hinge replacement, post reset, or roller service is a $180-$700 job, while a full gate and operator replacement runs into the thousands. We’ll tell you honestly if the metal is too far gone, and we’ll show you the evidence in photos. No pressure, no upsell.
Same-day service depends on the schedule and the nature of the problem, but a live person will answer your call at any hour and give you an honest window. For a gate stuck open or a post about to fall, we treat that as a priority. Call (817) 826-9477 and tell us what’s happening; we’ll tell you when we can be there and what it’ll cost to diagnose.
Ghost Controls covers its motors, boards, and manufactured components. It does not cover the gate itself, the hinges, the post, the rail, or the welding that holds those pieces together; those are site-installed components. If your motor is under warranty, we’ll preserve that coverage by specifying OEM parts where it matters. If the failure is in the metal, that’s a repair you authorize with us directly.
Get a Written Price for Your Ghost Controls Gate Repair in Lewisville
If your Ghost Controls gate is sagging, dragging, failing to latch, or cracking at the welds, call us at (817) 826-9477. You’ll speak to a live person, schedule an inspection, and receive a written price before any work begins. Servicing Lewisville and nearby areas, every job comes with our 365-Day Done Right Promise and a documented photo record of exactly what we did. Estimates are free.
Written by Adrian Vance, Owner, Vance Gate Repair Lewisville at Vance Gate Repair Lewisville, serving Lewisville and nearby areas.