Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterDriveway Gate in Lewisville, TX
Our Gate Installation services and driveway gate repairs in Lewisville, TX, generally involve motor adjustments, sensor realignments, or structural repairs, with costs typically ranging from $250 to $1,800 depending on the complexity of the gate system. At Vance Gate Repair Lewisville, we provide a written price before any work begins, ensuring you know exactly what the job entails before we turn a single screw. Whether you are dealing with a gate that refuses to close, a motor that hums but won’t move, or a photo-eye that keeps tripping, our team provides the technical documentation and upfront pricing required to resolve the issue correctly the first time.
We believe that a repair is only as good as the record left behind. When we service your driveway gate, we do not just tighten a bolt and leave. We follow The Haven Standard, which means we document every limit switch setting, every voltage reading, and every adjustment in a photo log that stays with you. This practice, established by our founder Adrian Vance in 2014, ensures that any future technician-or you, the homeowner-has a clear history of what was adjusted and why. If you are looking for Gate Installation in Lewisville or need specialized repair for an existing unit, we have the experience to manage it.
You can reach us at (817) 826-9477 to discuss your specific gate model. We answer the phone 24 hours a day, so you will always speak to a live person rather than a recording.
When You Need Driveway Gate Service
Driveway gates are complex machines exposed to the elements. In Lewisville, we see specific patterns of failure caused by our local environment. The expansive clay soil common in this part of Texas often causes gate posts to shift, which puts stress on hinges and forces motors to work harder than they were designed to. Recognizing these signs early often prevents a minor repair from becoming a full motor replacement.
- The Gate Is Binding or Dragging: If you hear grinding metal or see the gate scraping the driveway, the hinges or the post foundations have likely shifted. This is common in Lewisville due to soil movement. We realign the hinges and check the pivot points to ensure the gate swings or slides freely.
- The Gate Stops Mid-Cycle: If your gate moves a few feet and then stops or reverses, the limit switches or the motor’s internal force sensors are likely out of calibration. We adjust these settings and verify the motor’s travel distance against the manufacturer’s specifications.
- The Photo-Eye Is Tripping Unnecessarily: The photo-eye-the infrared beam that stops the gate if an object crosses its path-is sensitive to misalignment. We inspect the housing, clean the lenses, and realign the beam to ensure it stays locked on the receiver, even during high winds.
- The Motor Hums But Does Not Move: This often points to a failed capacitor or a stripped gear inside the operator. We test the capacitor’s microfarad rating and inspect the internal gears for signs of wear or stripped teeth, common in older units from brands like LiftMaster or Elite.
- Intermittent Power or Logic Board Issues: If your gate operates sporadically or ignores remote commands, the logic board may be experiencing corrosion or power supply failure. We check the voltage at the control board and inspect all wire terminations for oxidation, which happens frequently in our humid North Texas climate.
- Unusual Noises During Operation: A clicking, clunking, or high-pitched squeal is a mechanical warning. We lubricate the drive chain or screw drive and inspect the rollers to prevent premature wear on the motor assembly.
If you notice any of these symptoms, please call (817) 826-9477 to schedule a technician. We offer a free second opinion on any written estimate you have already received from another company, provided you have the paperwork ready for us to review.
Our Driveway Gate Process
Adrian Vance founded our company on the principle that commercial-grade documentation should be the standard for residential gates. We do not offer verbal estimates that change once we start working. We follow a strict, five-step process for every driveway gate service call.
- Arrival and Safety Assessment: Upon arrival, we inspect the gate system for immediate safety hazards. Because driveway gates involve high-tension springs, heavy steel panels, and electrical components, we ensure the area is secured before beginning any diagnostic work.
- Diagnostic Documentation: We identify the specific failure point. Whether it is a circuit board issue on a DoorKing operator or a misaligned chain on a Mighty Mule system, we take photographs of the component as it was found.
- Written Scope and Price: Before we touch a tool, we present you with a written scope of work and a fixed price. This is Clause 1 of The Haven Standard: you have the price in writing before the work begins. There are no surprises.
- Execution and Adjustment: We perform the repair or adjustment. If we replace a part, we photograph the new part installed. If we adjust a limit switch or a tension setting, we record the new position in our logs.
- Final Verification and Record Delivery: We test the gate through multiple cycles to ensure the problem is resolved. Before we leave, we provide you with a photo log of the work performed, which serves as a permanent record of the maintenance done on your property.
Every completed repair is backed by our 365-Day Done Right Promise. If the repair does not hold or if the issue persists within that year, we come back and make it right at no additional charge. We encourage you to visit our home page to learn more about how we operate.
BeforeAfterDriveway Gate Pricing in Lewisville
We provide upfront, written pricing for all services. Because gate systems vary significantly-from simple residential swing gates to complex commercial slide operators-we assess your specific hardware before finalizing the cost. See How Much Does Gate Installation Cost? (2026 Price Guide) - Lewisville, TX for related pricing details. The following ranges reflect common repairs we perform in the Lewisville area.
| Service Type | Estimated Price Range |
|---|---|
| Sensor Alignment & Calibration | $150 - $250 |
| Logic Board Diagnostics & Reset | $200 - $400 |
| Gate Hinge Repair or Welding | $300 - $600 |
| Capacitor or Limit Switch Replacement | $250 - $450 |
| Full Gate Operator Replacement | $1,200 - $2,800+ |
These prices are estimates. The final cost depends on the brand of your operator (such as LiftMaster, DoorKing, or Elite) and the specific parts required. Because we keep a wide inventory of parts on our trucks, we can often complete the repair during the initial visit, saving you the cost of a return trip. Call (817) 826-9477 for an exact quote on your specific gate.
Safety Warning: High-Tension Components
Driveway gates are heavy, often weighing several hundred pounds, and operate using high-tension springs, cables, and high-voltage electrical connections. Attempting to adjust these components without the proper training or equipment can result in severe injury or property damage. We strongly recommend that you do not attempt to adjust tension springs, replace cables, or open the motor housing to tinker with electrical wiring yourself. If your gate is malfunctioning, please contact a professional technician to perform the work safely.
FAQs - Driveway Gate
Is it cheaper to repair or replace my driveway gate motor?
Repair is almost always more cost-effective than replacement, provided the motor’s core components-such as the gear box and the main chassis-are still intact. We prioritize repairing parts like limit switches, capacitors, and circuit boards, which can extend the life of your operator by years. We only recommend replacement if the motor is obsolete, parts are no longer manufactured, or the cost of the repair exceeds 50% of the cost of a new unit. Call (817) 826-9477 for an honest assessment of your current system.
Can you fix my gate today?
We offer same-day service for most driveway gate repairs in Lewisville, as we prioritize getting your security and access restored quickly. When you call, we will provide you with an estimated arrival window based on our current schedule. Because we carry common parts for major brands like LiftMaster and Mighty Mule on our trucks, we are often able to complete the repair in a single visit.
Do you work on all gate motor brands?
Yes, we service all nine major gate automation brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We do not steer you toward a specific brand or force you to replace your existing system just because it is an older model. Our goal is to maintain the equipment you already have, provided it is safe and functional.
What does the “365-Day Done Right Promise” cover?
Our promise covers all labor and parts we install for a full year. If the specific issue we repaired recurs or if the part we installed fails within 365 days of the service date, we will return to your property and fix it at no additional cost to you. This is our commitment to quality, ensuring that we get the job done correctly the first time. If you have questions about a previous service, call us at (817) 826-9477.
Every interaction with our team is governed by the Haven Standard, which prioritizes clear documentation and upfront pricing. Whether you are dealing with a simple sensor issue, a Pedestrian Gate problem, or a complex motor failure, we provide the technical expertise to keep your gate running safely. Call (817) 826-9477 today to schedule your service or to request a free estimate.
Written by Adrian Vance, Owner at Vance Gate Repair Lewisville, serving Lewisville.