Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Ghost Controls Gate Repair in Carrollton, TX | Vance Gate Repair Lewisville
Ghost Controls Gate Repair in Carrollton runs $95 to $340 for most service calls, and same-day dispatch is available when an arm strips a gear or an R Series board quits. We’re independent Ghost Controls specialists, not a manufacturer dealer, which means we fix what’s broken instead of pushing a full replacement. That matters in Carrollton, where expansive clay soil torques gate posts out of plumb season after season and hundreds of HOA-bound homes along Hebron Parkway run AXS swing arms we service regularly. Call (817) 826-9477 for a written price before anyone touches a tool.
Why Carrollton Residents Choose Us for Ghost Controls Service
We’ve worked on enough Ghost Controls operators in Carrollton to know exactly how they fail here. Not how they fail in Plano or Flower Mound, but here, where the soil moves under concrete footings and the summer heat bakes control boards in attached garages. Our founder, Adrian Vance, spent years in commercial access-control installation before moving into residential gate work, and that background shows in how we document every job: written scope, written price, photographed record before we leave.
We keep Ghost Controls remotes, control boards, gear sets, and photo-eyes stocked for the model lines common across Carrollton’s 1980s and 1990s tract home subdivisions. When a board dies on a Friday afternoon in Valley Ranch, we’re not waiting on a distributor in Dallas. For more on what we carry and how we price it, see our Ghost Controls sales & service page.
Common Ghost Controls Gate Repair Problems We Solve in Carrollton

- AXS arm operators stripping internal gears. Carrollton’s black clay swells after heavy rain and contracts in drought, pushing gate posts out of vertical. An AXS arm attached to a post that’s drifted even one inch binds at the gear interface and strips teeth. We realign or re-foot the post, then replace the gear set rather than the whole arm.
- R Series slide gate boards burning out. The R2.0 and R28 slide motors common in Carrollton’s older gated subdivisions depend on a clean sensor reading. When the slide track heaves from drought-shifted concrete, the motor draws excessive current until the board fails. We fix the track alignment first, then replace the board.
- Photo-eye lenses clouding in UV exposure. The relentless sun along corridors like Sam Rayburn Tollway and East Belt Line Road fogs Ghost Controls photo-eye lenses until the beam degrades and the gate faults mid-cycle. A $30 lens replacement often restores operation when the gate seems electrically dead.
- Battery backup units swelling in garage heat. Carrollton summers routinely push attached garages past 105°F. Ghost Controls battery backup units were never designed for that kind of sustained heat, and swollen cells leak onto the control board, killing it. We replace both and relocate the backup to a cooler mounting point where possible.
- Remotes losing programming after hard freezes. North Texas ice storms cycle temperatures sharply, and Ghost Controls receivers mounted near metal gate frames sometimes lose programming after extreme cold. Reprogramming is a 10-minute service call, not a reason to replace the operator.
Before
AfterGhost Controls Service in Carrollton: What Local Conditions Mean for Your Equipment
Here’s what’s genuinely different about Carrollton for Ghost Controls owners. The city sits on the Elm Fork of the Trinity River floodplain, and its expansive black clay soil is notorious for swelling inches after rain and shrinking just as aggressively in summer heat. That movement torques concrete footings, racks gate posts, and leans columns. For a Ghost Controls AXS arm bolted to a post that’s drifted 2 degrees out of plumb, the result is uneven gear wear, stalling, and eventually stripped gear teeth. We see this pattern weekly along Preston Road and North Denton Tap Road, where homes from the 1980s sit on original footings that were never poured deep enough for this soil. In Lewisville or Coppell the soil behaves differently; in Carrollton it’s the dominant factor in gate operator longevity. We re-foot posts below the active clay zone and add a moisture barrier, then reset the arm’s travel range so the operator isn’t fighting the ground.
Ghost Controls Models & Products We Service in Carrollton

We work on the full Ghost Controls lineup that’s installed across Carrollton: the AXS Series swing arm operators, the R Series slide gate motors (including R2.0 and R28), Operator Arm Kits like the AXA and AXS, and the SD Series solar dual gate systems. For warranty-sensitive components like control boards and remotes, we use Ghost Controls OEM parts. For out-of-production R Series components where the manufacturer no longer stocks inventory, we source proven aftermarket equivalents from local Dallas-area suppliers and photograph everything we install. We’ll never recommend replacing a $400 operator when a $40 limit switch or gear set fixes the gate. If you’re just outside Carrollton, check our Carrollton service area page to confirm coverage.
Ghost Controls Service Pricing in Carrollton
Ghost Controls repair pricing in Carrollton breaks down like this:
- Service call + diagnostic: $60 to $95, waived with most repairs
- Gear set replacement on AXS arms: $120 to $240, depending on arm model
- Control board replacement: $180 to $340, OEM or aftermarket depending on availability
- Post realignment (single gate post): $200 to $450, depending on footing depth and access
- Remote programming or replacement: $40 to $90 per remote
What drives the upper end is usually post work. If clay heave has shifted the post, no gear set lasts long until the footing is corrected. Every estimate we write in Carrollton includes the diagnosed failure, the part number, the labor, and the total. You’ll see it in writing before work starts. Call (817) 826-9477 for an exact quote, or bring us another company’s written estimate and we’ll review it free.
Serving Carrollton, TX - Our Local Coverage Area

We’re based in the Carrollton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Carrollton
Does Ghost Controls still support the older R Series slide gate motors installed in Carrollton in the early 2000s?
Ghost Controls has largely moved out of production of original R Series parts, which is why we stock aftermarket equivalents from local Dallas suppliers for the R2.0 and R28 boards, limits, and drive belts. These parts are proven on the exact failures we see in Carrollton’s older gated subdivisions, and we document every installation with the part number in your job record. If you have an R Series acting up, call (817) 826-9477 and we’ll tell you what’s actually available.
Can you realign a Ghost Controls swing gate arm without disturbing my HOA-approved gate finish?
Yes, and we do it regularly along Hebron Parkway and throughout Carrollton’s covenant-heavy subdivisions. The arm, the bracket, and the post alignment are adjusted without cutting, repainting, or disturbing finished iron. When visible work is unavoidable under HOA rules, we document the scope for the association review before starting. The fix itself is usually invisible.
Why does my Ghost Controls gate opener work fine in the morning but stall in the afternoon?
What you’re describing is often thermal expansion binding. In Carrollton, the black clay swells with moisture and the direct afternoon sun expands the metal gate frame, which tightens the hinge geometry and overloads the operator until it faults. We diagnose whether it’s post drift, hinge wear, or a heat-degraded component, then fix it at the source. Call (817) 826-9477 with your model number and we’ll give you an honest read.
Can you install a Ghost Controls solar operator on a double swing gate in my Valley Ranch backyard?
Yes, the SD Series solar dual gate kit handles a double swing, but panel placement matters here. Valley Ranch has mature tree cover on many lots, and a partially shaded solar panel means under-voltage startup faults. We’ll measure the sunlight on your specific posts before recommending anything, and we’ll put the recommendation in writing.
My Ghost Controls remote stopped working after a hard freeze - is that a common local issue?
Yes, it’s common enough that we answer it every winter in Carrollton. Hard freezes cause rapid contraction in gate frames and post brackets, and receiver antennas mounted tight to cold metal pick up interference or lose programming. Reprogramming usually fixes it, and repositioning the antenna may prevent a repeat. A service call beats replacing the operator. Call (817) 826-9477 for a same-day visit.
Service Areas Near Carrollton

We serve Carrollton and the surrounding cities. Ghost Controls service in Lewisville covers homes from Vista Ridge Mall down to the lake. Ghost Controls service in Coppell reaches the older developments near Andy Brown Park. We also take calls from Flower Mound, Grapevine, and Little Elm for Ghost Controls arms, slide motors, and access systems.
Book Your Ghost Controls Service in Carrollton Today
Call (817) 826-9477 now for same-day Ghost Controls repair in Carrollton when an arm strips or a board dies. Name what you found, name what it costs, name what you left behind. That’s how we work, and you’ll see it in writing before the first tool comes out.
Written by Adrian Vance, Owner at Vance Gate Repair Lewisville, serving Carrollton since 2014.





Before
After
Before
After